Results 1 to 4 of 4
  1. #1
    Senior Bantu's Avatar
    Join Date
    May 2007
    Location
    In My Auckland Office
    Posts
    2,009

    Default Nothing sending to monitor

    Trying to put one computer together out of three old P4's

    Two full sets of Board, Graphics, Ram, CPU were working fine when I removed them from their cases maybe a year ago.

    So in picking the higher spec'd bits of each and putting them into one. I have tried with just CPU installed and get a series of long beeps. If I put in Memory no beeps. I have tried shuffling the components ram, CPU graphics and still not getting anything to the screen.

    I have tried 2 different PSU's also both of these were working prior to removal. I have the board out of the case on the table on a huge sheet of 5mm cardboard, but I was also getting the same results in the case.

    I did look through http://pressf1.co.nz/showthread.php?t=98957 and still nothing to the screen.

    I am running out of ideas.

    The bits I have to work with:
    Asus P4V800-X board and Asus P4C800 Deluxe
    Gigabyte GV-N55128DP AGP graphics and Two barely used PCI Graphic Cards
    Pentium 4 3.02, 3.2, 3.4 CPU's to choose from
    6 sticks of Corsair Ram to choose from
    2 x 17" CRT Philips Monitors
    1 420W PSU, 1 450W PSU
    Thermaltake Armor Case/1100W PSU
    Gigabyte GA-X58A-UD3R Motherboard i7-960 3.2 GHz
    Gigabyte GV-N670OC-4GD GForce GTX-670
    Corsair 4x8GB, DDR3-1600 32GB
    5 x Seagate HDD's 3.0TB each
    Dual 22" ViewSonic Widescreen
    NexStar Dual SATA Dock

  2. #2
    Senior Bantu's Avatar
    Join Date
    May 2007
    Location
    In My Auckland Office
    Posts
    2,009

    Default Re: Nothing sending to monitor

    Normally the Orange light on the monitor would turn green then start displaying stuff. No green light at all when PC is switched on, but when the graphic card is in and monitor is not connected it tells me on the screen that it is not connected that message goes away when i plug in the monitor.
    Thermaltake Armor Case/1100W PSU
    Gigabyte GA-X58A-UD3R Motherboard i7-960 3.2 GHz
    Gigabyte GV-N670OC-4GD GForce GTX-670
    Corsair 4x8GB, DDR3-1600 32GB
    5 x Seagate HDD's 3.0TB each
    Dual 22" ViewSonic Widescreen
    NexStar Dual SATA Dock

  3. #3
    Computer Technician wainuitech's Avatar
    Join Date
    Aug 2007
    Location
    Wellington
    Posts
    27,173

    Default Re: Nothing sending to monitor

    CMOS battery maybe ??
    Update / Upgrades = Replace old bugs with new ones.

  4. #4
    Senior Bantu's Avatar
    Join Date
    May 2007
    Location
    In My Auckland Office
    Posts
    2,009

    Default Re: Nothing sending to monitor

    Nope that did not fix it either:-(

    It recognises then the monitor is disconnected.
    Thermaltake Armor Case/1100W PSU
    Gigabyte GA-X58A-UD3R Motherboard i7-960 3.2 GHz
    Gigabyte GV-N670OC-4GD GForce GTX-670
    Corsair 4x8GB, DDR3-1600 32GB
    5 x Seagate HDD's 3.0TB each
    Dual 22" ViewSonic Widescreen
    NexStar Dual SATA Dock

Similar Threads

  1. Replies: 20
    Last Post: 20-10-2008, 11:01 AM
  2. Replies: 2
    Last Post: 11-12-2006, 01:44 PM
  3. Dual Monitor setup - Game opening in 'wrong' monitor
    By hummingbird42 in forum PressF1
    Replies: 7
    Last Post: 08-04-2005, 09:07 PM
  4. Sending msg thru LAN
    By Blue_face in forum PressF1
    Replies: 13
    Last Post: 08-05-2003, 03:30 PM
  5. Is F1 Sending ads???
    By in forum PressF1
    Replies: 6
    Last Post: 10-06-2002, 01:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •