Results 1 to 4 of 4

Thread: Thermal Paste

  1. #1
    Chao is back
    Guest

    Default Thermal Paste

    Is it necessary to use thermal paste on a CPU before you put a fan on it? I'm getting a new PC anytime now and the CPU is Athlon XP 2800+ and fan is Thermaltake Volcano 11+. I don't hear many people talk about thermal paste anymore so i was wondering if it's still necessary?

  2. #2
    Pheonix
    Guest

    Default Re: Thermal Paste

    Check the heatsink first. Usually they come with a "pad" stuck on them. You peel off the covering strip and attach.
    If it doesn't have one of these, then you definitely have to apply some thermal paste.
    More important than ever before. Probably not discussed as it is assumed that everyone knows. Doesn't hurt to ask though.
    Worst thing most people do is layer it on. You only need a very thin smear. Too much can even decrease the thermal efficiency.

  3. #3
    bmason
    Guest

    Default Re: Thermal Paste

    The volcano will come with some paste. And yes you need to use it. Its just cheap white stuff but it will be adequate.

  4. #4
    Bazza
    Guest

    Default Re: Thermal Paste

    Good question Chao: Yes it is essential. I did much research about this when mounting my HS fan on the cpu a while ago.

    Some opinions said the usual 'pad' supplied was not recommended, but to remove that & use a good paste. The preferred paste was 'Artic Silver'.

    If you do a google search for 'Artic silver' you will find much info about this subject with recommendations on the correct application of the paste.


Similar Threads

  1. Thermal Paste
    By bk T in forum PressF1
    Replies: 15
    Last Post: 16-09-2008, 06:25 AM
  2. Thermal Paste
    By EviLClouD in forum PressF1
    Replies: 4
    Last Post: 12-06-2008, 09:53 PM
  3. Thermal Paste?
    By bigmit37 in forum PressF1
    Replies: 17
    Last Post: 29-10-2007, 01:15 PM
  4. Thermal paste
    By Mike in forum PressF1
    Replies: 7
    Last Post: 07-03-2006, 05:43 PM
  5. Thermal Paste
    By Mark Veldhuizen in forum PressF1
    Replies: 19
    Last Post: 10-12-2003, 01:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •