Results 1 to 6 of 6
  1. #1

    Default Homenetwork using Nokia M1122 ADSL

    Hi there, I have a Nokia M1122 ADSL modem. It has 4 ethernet ports which I use to connect my 3 homecomputers for the internet.

    Everything works fine except that I cannot browse any of the computers on the network. I have all the correct sharing points and permissions (using Windows 2000) but still I can browse the ohter computers. I can ping all the other stations but can't use Windoes explorer to see the files on each PC.

    Is this possible with the modem and how do I do it, when i had just a hub connecting the PC's it worked just fine. I've tried using the hub again but then my internet doesn't work event though i can browse all the computers.

    Any ideas ould be helpful

  2. #2
    Capt Jimbo

    Default Re: Homenetwork using Nokia M1122 ADSL

    I'm not sure that the router is intended to be used as a hub.
    Although I'm not an expert on the subject I've seen a couple of networks connected to the internet through a Nokia router and in both cases they also used network switches for their internal network connectivity.
    Do you still have your original hub? It would be easy to connect that into the network.

    Capt Jimbo

  3. #3

    Default Re: Homenetwork using Nokia M1122 ADSL

    Thanks for that, I know it can be done I just don't know how, I recall something about connecting the Hub and router by using a crossover cale but I don't know exactly how it all works

  4. #4

    Default Re: Homenetwork using Nokia M1122 ADSL

    My router connects to the hub either by a crossover cable, or if the hub has an "uplink" port (and most do), then a standard cable from the uplink port to the ADSL router should work.

  5. #5

    Default Re: Homenetwork using Nokia M1122 ADSL

    I have used these router/modems as a hub and all has worked fine. Of cause you can only have up to 4 PC's connected.

    Are you using the routers built in DHCP server?

  6. #6

    Default Re: Homenetwork using Nokia M1122 ADSL

    Yes I am using the built in DHCP server of the modem.

    I have a crossover cable but my hub doesn't have a uplink port!

    What else can it be... Do You think I should just uninstalll the network components from all the PC's and start from scratch?

    So far what I've tried... connected all the PC's to the hub and then the hub to the modem using a crossover cable... nothing worked.

Similar Threads

  1. Nokia M1122 ADSL Modem issues
    By Xander in forum PressF1
    Replies: 8
    Last Post: 09-11-2007, 04:36 PM
  2. Replies: 3
    Last Post: 30-01-2005, 10:18 PM
  3. Nokia M1122
    By Andy_G in forum PressF1
    Replies: 13
    Last Post: 27-10-2003, 08:42 PM
  4. Nokia M1122 ADSL Router/4 port hub
    By floyds in forum PressF1
    Replies: 5
    Last Post: 18-03-2003, 11:02 PM
  5. Replies: 0
    Last Post: 24-12-2000, 12:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts