Results 1 to 5 of 5
  1. #1

    Default disk check fails

    I'm having some problems with a 4 year old win2k PC siezing and am doing some maintenance. It's been a lemon from day 1 but not quite bad enough to warrant throwing it out. The manufacturer took it in for tests when it was new and couldn't find any real problems.

    For some time I've had Norton utilities running and on startup it tries to check the disks but can't because of a sharing error.

    Finally tonight I have put the PC into safe mode and tried from there - similar error: "The disk check could not be performed because exclusive access to the drive could not be obtained". That's on the C: drive (only about 2 years old). D: is the original hard disk, is physically separate and has no problems.

    I've loaded up a temperature monitor too, but don't know what is acceptable and what's too hot. Its sitting on about 40C which seems hot to me.

    Does anyone have any ideas?


  2. #2

    Default Re: disk check fails

    To run a scanner during system startup
    Running a scanner during system startup is not the same as running it after system startup. During system startup, fewer files are open, so a scanner is more likely to be able to obtain exclusive access to the drive. Norton Disk Doctor for Windows NT/2000/XP does not have the capability of running during the bootup process, but CHKDSK does. If you receive the above message, you can run CHKDSK during the bootup process by answering Yes to the question "Would you like to schedule a repair to occur the next time you start the system?"

    To set a scanner to run during startup the next time Windows NT/2000/XP starts, follow these steps:
    1. Open Norton Disk Doctor.
    2. Check Fix Errors.
    3. Select the drive.
    4. Deselect any other drives.
    5. Click Diagnose.
    6. Wait for the following prompt:

    "NDD could not perform a diagnosis or repair because exclusive access to the drive could not be obtained. NDD can diagnose this drive if 'Fix Errors' is unchecked. Would you like to schedule a repair to occur the next time you restart the system?"

    7. Click Yes. The next time the computer boots, a repair scanner will run during the bootup process. =*col=kb*st=1*nh=7*pcode=nu*qp=url:us-lu,url:/nunt.nsf/8e4d888f4373bb0485256951004d887d*qt=%2Bexclusive%2 0%2Baccess%20%2Berror*miniver=nu2001-nt*sone=nu2001-nt_tasks.html*stg=3*prod=Norton%20Utilities*ver=20 01%20for%20Windows%20NT/2000*svy=*taskquery=error*boolean=and<>&sone=nu200 1-nt_tasks.html&stg=3&prod=Norton%20Utilities&ver=20 01%20for%20Windows%20NT/2000&base=

  3. #3

    Default Re: disk check fails

    As the link is so long, here is the document ID at
    Product(s): Norton Utilities 2.0 - WinNT, Norton Utilities 2001 v5.0 - WinNT/2000, Norton Utilities 2002 v6.0 - WinNT/2000/XP
    Operating System(s): Windows NT 4.0, Windows 2000, Windows XP
    Document ID: 1997317125140
    Date Created: 03/17/97
    Last Modified: 06/28/2002

  4. #4

    Default Re: disk check fails

    40C is only slightly warm. Not too hot.
    It will warm up quite a bit when you play games and things.

  5. #5

    Default Re: disk check fails

    thanks for the info. I hadn't realised the fail message was so generalised. I will have to keep looking for other reasons for the PC to lock up now

    and thanks Sparky for the temperature feedback.

Similar Threads

  1. disk check stuck at 6%
    By xevous in forum PressF1
    Replies: 2
    Last Post: 23-10-2008, 03:35 PM
  2. Replies: 1
    Last Post: 02-08-2007, 05:52 PM
  3. Laptop Hard Disk Fails
    By Scotyt in forum PressF1
    Replies: 11
    Last Post: 15-02-2005, 02:40 PM
  4. Fails crc check
    By Nodrog in forum PressF1
    Replies: 1
    Last Post: 20-02-2004, 05:03 PM
  5. Fails to find hard disk
    By in forum PressF1
    Replies: 0
    Last Post: 11-07-2000, 11:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts