Results 1 to 3 of 3
  1. #1
    Guest

    Default Modem configuration in linux

    I have just finished configuring my linux system to work like I want it to. The only problem is the modem. Whenever I restart the computer, I have to use the setserial command to make the modem respond. HELP!

    Simon

  2. #2
    Guest

    Default Re: Modem configuration in linux

    There are two ways to do this, the right way (with a script /etc/rc.d/setserial -- as described in Modem-HOWTO) or another 'good enough' way which will work -- adding the setserial command as the last line of the rc.local file. There's a description of this at: www.math.sunysb.edu/~comech/tools/PCImodems.html . The third way ... (this is a Unix and there are always LOTS of ways to do anything) is to put the line in /etc/profile ... but its better to have it in the booting sequence rather than do it at login time.

    Been a long struggle, hasn't it. Now enjoy it.

  3. #3
    Guest

    Default Re: Modem configuration in linux

    Just another thought...

    If the serial ports aren't being picked up correctly the BIOS may need altering.
    If your BIOS is set up to expect a Plug & Play OS then Linux may not pick the ports up.

    Type the following command to inspect your ports.

    setserial -g /dev/ttyS*

    if it comes up with something like:

    /dev/ttyS0, UART: unknown, Port:OxO3f8, IRQ: 4 & the UART is showing up as unknown, then linux hasn't detected them.

    Go into your BIOS, find the option for P&P/OS and turn it off, save the settings & reboot.

    This time the kernel should detect them correctly.

    Might not be the answer but it's worth a go.

    Cheers

Similar Threads

  1. New modem and router configuration
    By Kundalini in forum PressF1
    Replies: 45
    Last Post: 13-06-2008, 01:09 PM
  2. modem configuration
    By Meg_h_nz in forum PressF1
    Replies: 2
    Last Post: 23-11-2004, 09:18 AM
  3. Modem configuration under Linux
    By Caesius in forum PressF1
    Replies: 2
    Last Post: 18-02-2004, 10:21 PM
  4. Is there an automatic modem configuration script for linux?
    By smashedlittlebugger in forum PressF1
    Replies: 9
    Last Post: 04-02-2004, 08:31 PM
  5. Modem Configuration
    By Caro in forum PressF1
    Replies: 4
    Last Post: 30-06-2002, 01:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •