Results 1 to 2 of 2
  1. #1
    Senior Member lostsoul62's Avatar
    Join Date
    Oct 2010

    Default WD network hard drive

    I have a WD network hard drive hook up to my main computer using a RJ45 so my other 2 computer can see it. I disconnected the drive from my main computer by accident. I put in the software that came with the drive into my main computer but still can't see it from my main computer? How can I re connect it?

  2. #2
    Computer Technician wainuitech's Avatar
    Join Date
    Aug 2007

    Default Re: WD network hard drive

    If its a networked (RJ45) then it should be connecting to a Router or Switch/Router to get the IP address from the router.

    There's usually two settings for networked (Basically NAS drives) either Static, which would be the better one, or dynamic (router issues the IP)

    1st you need to make sure its actually connected.

    What you can try is download and run IPScan Run it, when complete it will show every attached device on your network, assuming the WD drive is actually working and attached then you can see its IP address,.

    Open a run Window (Windows key + R) type in the Address of the WD Drive, click OK or press enter, and it should open the location. you would type \\ ( with X being the WD address)

    example picture / address below:

    Click image for larger version. 

Name:	Example IP.jpg 
Views:	16 
Size:	16.5 KB 
ID:	11250

Similar Threads

  1. Network Hard Drive (Slow)
    By lostsoul62 in forum PressF1
    Replies: 5
    Last Post: 14-11-2012, 06:31 AM
  2. Replies: 14
    Last Post: 08-12-2010, 07:01 AM
  3. Replies: 3
    Last Post: 22-10-2007, 11:43 AM
  4. Hard drive >>> Network Speed
    By hamstar in forum PressF1
    Replies: 5
    Last Post: 06-05-2005, 11:37 PM
  5. Replies: 6
    Last Post: 19-04-2003, 11:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts