Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Smiling Down On Youse SurferJoe46's Avatar
    Join Date
    May 2005
    Location
    Hamilton, Montana, USA
    Posts
    14,317

    Arrow RTL8812AU Is Still Bugging me!

    This AM I had an impossible WiFi log-on occur.

    Over 30 attempts to get online with my (now) world-(in)famous WSK RTL8812AU adapter had been met with zero results I had to get my ol' Alpha Unit out of the box again. (Infamous; a good word there)

    I got my old Alpha Unit and plugged it into a front USB slot and once it was recognized by the machine and it was up-n-running, I then plugged my WSKY into the front slot right next to the Alpha Unit - then once it lit up and started twinkling, I pulled the Alpha Unit out of it's port.

    Yeah - hot-swaps and hot jerk-outs! I'm living the dream now!

    The WSKY is at present running in the FRONT USB slot - one and the same where I had a lot of trouble in the past - but right now it seems to operate pretty good.

    Thinking here that I have some out-of-date or busted app downloads - I ran the following:

    PHP Code:
    joseph@SurfersMintu1 ~ $ sudo apt-get install wicd
    [sudopassword for joseph
    Reading package lists... Done
    Building dependency tree       
    Reading state information
    ... Done
    The following packages were automatically installed 
    and are no longer required:
      
    linux-headers-3.13.0-141 linux-headers-3.13.0-141-generic
      linux
    -headers-3.13.0-142 linux-headers-3.13.0-142-generic
      linux
    -headers-3.13.0-143 linux-headers-3.13.0-143-generic
      linux
    -image-extra-4.4.0-112-generic linux-image-extra-4.4.0-116-generic
    Use 'apt-get autoremove' to remove them.
    The following extra packages will be installed:
      
    python-wicd wicd-daemon wicd-gtk
    The following 
    NEW packages will be installed:
      
    python-wicd wicd wicd-daemon wicd-gtk
    0 upgraded
    4 newly installed0 to remove and 2 not upgraded.
    Need to get 291 kB of archives.
    After this operation2,509 kB of additional disk space will be used.
    Do 
    you want to continue? [Y/ny                                                  *note_ I said 'y'
    Get:1 http://archive.ubuntu.com/ubuntu/ trusty/universe python-wicd all 1.7.2.4-4.1ubuntu1 [34.3 kB]
    Get:2 http://archive.ubuntu.com/ubuntu/ trusty/universe wicd-daemon all 1.7.2.4-4.1ubuntu1 [166 kB]
    Get:3 http://archive.ubuntu.com/ubuntu/ trusty/universe wicd-gtk all 1.7.2.4-4.1ubuntu1 [85.9 kB]
    Get:4 http://archive.ubuntu.com/ubuntu/ trusty/universe wicd all 1.7.2.4-4.1ubuntu1 [4,256 B]
    Fetched 291 kB in 1s (194 kB/s
    Preconfiguring packages ...
    Selecting previously unselected package python-wicd.
    (
    Reading database ... 409918 files and directories currently installed.)
    Preparing to unpack .../python-wicd_1.7.2.4-4.1ubuntu1_all.deb ...
    Unpacking python-wicd (1.7.2.4-4.1ubuntu1) ...
    Selecting previously unselected package wicd-daemon.
    Preparing to unpack .../wicd-daemon_1.7.2.4-4.1ubuntu1_all.deb ...
    Unpacking wicd-daemon (1.7.2.4-4.1ubuntu1) ...
    Selecting previously unselected package wicd-gtk.
    Preparing to unpack .../wicd-gtk_1.7.2.4-4.1ubuntu1_all.deb ...
    Unpacking wicd-gtk (1.7.2.4-4.1ubuntu1) ...
    Selecting previously unselected package wicd.
    Preparing to unpack .../wicd_1.7.2.4-4.1ubuntu1_all.deb ...
    Unpacking wicd (1.7.2.4-4.1ubuntu1) ...
    Processing triggers for man-db (2.6.7.1-1ubuntu1) ...
    Processing triggers for ureadahead (0.100.0-16) ...
    ureadahead will be reprofiled on next reboot
    Processing triggers 
    for hicolor-icon-theme (0.13-1) ...
    Processing triggers for desktop-file-utils (0.22-1ubuntu1.1) ...
    Processing triggers for gnome-menus (3.10.1-0ubuntu2) ...
    Processing triggers for mime-support (3.54ubuntu1.1) ...
    Setting up python-wicd (1.7.2.4-4.1ubuntu1) ...
    Setting up wicd-daemon (1.7.2.4-4.1ubuntu1) ...
     * 
    Starting Network connection manager wicd                              [fail]
    Processing triggers for ureadahead (0.100.0-16) ...
    Setting up wicd-gtk (1.7.2.4-4.1ubuntu1) ...
    Setting up wicd (1.7.2.4-4.1ubuntu1) ...
    joseph@SurfersMintu1 ~ $ 
    See that 'fail' up there? Is this my problem?

    Let me run another command and see if it helps a little (or not):

    PHP Code:
    joseph@SurfersMintu1 ~ $ lsusb
    Bus 001 Device 007
    ID 0bda:a811 Realtek Semiconductor Corp
    Bus 001 Device 001ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 005 Device 001
    ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 003
    ID 046d:c51b LogitechIncV220 Cordless Optical Mouse for Notebooks
    Bus 004 Device 004
    ID 0781:b6b7 SanDisk Corp
    Bus 004 Device 002ID 0451:2046 Texas InstrumentsIncTUSB2046 Hub
    Bus 004 Device 001
    ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001
    ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 001
    ID 1d6b:0001 Linux Foundation 1.1 root hub
    joseph
    @SurfersMintu1 ~ $ exit 
    Bus 1 is the current home for the WSKY. When I had the Alpha Unit also in the front panel - in an emergent purpose just to get online - it too was reported in Bus 2, but I pulled it out when the WSKY started blinking normally.

    This WSKY/Realtek - RTL8812AU driver inconsistency is well documented on many - if not all - websites and YouTube tutorials as being clumsy, inconsistent and somewhat irreverent to the user.

    The reason I like it is for the speed I can get out of it. The Alpha is supposed to be the ultimate - but the WSKY outshines it - when it works, that is!

    I just thought that I'd pass this little hint along ->

    DON'T THROW AWAY YOUR OLD WIFI ADAPTER/DONGLE! I MAY BE THE ONLY WAY TO RECOVER THE OTHER APP/PROGRAM TO MAKE YOUR PREFERRED DEVICE WORK AGAIN!

    I know that's just wrong on all levels - but that's the way it seems to work for me.


    Warum werden wir so früh alt und klug so spät?

  2. #2
    Smiling Down On Youse SurferJoe46's Avatar
    Join Date
    May 2005
    Location
    Hamilton, Montana, USA
    Posts
    14,317

    Default Re: RTL8812AU Is Still Bugging me!

    I added dmsg to the Terminal and got this:

    PHP Code:
    [    0.284776pci_bus 0000:0aresource 11 [mem 0xfed40000-0xfed40fff window]
    [    
    0.284779pci_bus 0000:0aresource 12 [io  0x0d00-0xffff window]
    [    
    0.284836NETRegistered protocol family 2
    [    0.285137TCP established hash table entries16384 (order5131072 bytes)
    [    
    0.285210TCP bind hash table entries16384 (order6262144 bytes)
    [    
    0.285307TCPHash tables configured (established 16384 bind 16384)
    [    
    0.285373UDP hash table entries1024 (order332768 bytes)
    [    
    0.285391UDP-Lite hash table entries1024 (order332768 bytes)
    [    
    0.285488NETRegistered protocol family 1
    [    0.285526pci 0000:00:02.0Video device with shadowed ROM
    [    0.287486PCICLS 32 bytes, default 64
    [    0.287605Unpacking initramfs...
    [    
    1.217325Freeing initrd memory35808K
    [    1.217629Scanning for low memory corruption every 60 seconds
    [    1.218257auditinitializing netlink subsys (disabled)
    [    
    1.218294audittype=2000 audit(1525618330.216:1): initialized
    [    1.218829Initialise system trusted keyring
    [    1.219072HugeTLB registered 2 MB page sizepre-allocated 0 pages
    [    1.222822zbudloaded
    [    1.223479VFSDisk quotas dquot_6.6.0
    [    1.223559VFSDquot-cache hash table entries512 (order 04096 bytes)
    [    
    1.224244squashfsversion 4.0 (2009/01/31Phillip Lougher
    [    1.224684fuse init (API version 7.23)
    [    
    1.224991Key type big_key registered
    [    1.225020Allocating IMA MOK and blacklist keyrings.
    [    
    1.225814Key type asymmetric registered
    [    1.225822Asymmetric key parser 'x509' registered
    [    1.225916Block layer SCSI generic (bsgdriver version 0.4 loaded (major 249)
    [    
    1.225989io scheduler noop registered
    [    1.225995io scheduler deadline registered (default)
    [    
    1.226072io scheduler cfq registered
    [    1.226649pcieport 0000:00:1c.1enabling device (0000 -> 0003)
    [    
    1.226974pci_hotplugPCI Hot Plug PCI Core version0.5
    [    1.226991pciehpPCI Express Hot Plug Controller Driver version0.4
    [    1.227057vesafbmode is 1024x768x32linelength=4096pages=0
    [    1.227060vesafbscrollingredraw
    [    1.227064vesafbTruecolorsize=8:8:8:8shift=24:16:8:0
    [    1.227086vesafbframebuffer at 0xc0000000mapped to 0xffffc90000400000using 3072ktotal 3072k
    [    1.227278Consoleswitching to colour frame buffer device 128x48
    [    1.227302fb0VESA VGA frame buffer device
    [    1.227484inputPower Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
    [    1.227493ACPIPower Button [PWRB]
    [    
    1.227578inputPower Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    1.227587ACPIPower Button [PWRF]
    [    
    1.229236thermal LNXTHERM:00registered as thermal_zone0
    [    1.229241ACPIThermal Zone [THM0] (60 C)
    [    
    1.229319GHESHEST is not enabled!
    [    
    1.229527Serial8250/16550 driver32 portsIRQ sharing enabled
    [    1.24997100:06ttyS0 at I/O 0x3f8 (irq 4base_baud 115200is a 16550A
    [    1.253288Linux agpgart interface v0.103
    [    1.253406agpgart-intel 0000:00:00.0Intel 945G Chipset
    [    1.253437agpgart-intel 0000:00:00.0detected gtt size262144K total262144K mappable
    [    1.253780agpgart-intel 0000:00:00.0detected 8192K stolen memory
    [    1.253947agpgart-intel 0000:00:00.0AGP aperture is 256M 0xc0000000
    [    1.254153tpm_tis 00:08: [irq 10]
    [    
    1.254163tpm_tis 00:08: [mem 0xfed40000-0xfed40fff]
    [    
    1.254379tpm_tis 00:08: activated
    [    1.276061tpm_tis 00:08: 1.2 TPM (device-id 0xFErev-id 3)
    [    
    1.338249tpm tpm0TPM is disabled/deactivated (0x6)
    [    
    1.341424loopmodule loaded
    [    1.341742ata_piix 0000:00:1f.2version 2.13
    [    1.341982ata_piix 0000:00:1f.2MAP IDE IDE P1 P3 ]
    [    
    1.497512scsi host0ata_piix
    [    1.497746scsi host1ata_piix
    [    1.497843ata1PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0 irq 14
    [    1.497848ata2SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30b8 irq 15
    [    1.498200libphyFixed MDIO Busprobed
    [    1.498207tunUniversal TUN/TAP device driver1.6
    [    1.498210tun: (C1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    
    1.498331PPP generic driver version 2.4.2
    [    1.498472ehci_hcdUSB 2.0 'Enhanced' Host Controller (EHCIDriver
    [    1.498490ehci-pciEHCI PCI platform driver
    [    1.498776ehci-pci 0000:00:1d.7EHCI Host Controller
    [    1.498788ehci-pci 0000:00:1d.7: new USB bus registeredassigned bus number 1
    [    1.498807ehci-pci 0000:00:1d.7debug port 1
    [    1.502725ehci-pci 0000:00:1d.7cache line size of 32 is not supported
    [    1.502752ehci-pci 0000:00:1d.7irq 23io mem 0xd03c0000
    [    1.512050ehci-pci 0000:00:1d.7USB 2.0 startedEHCI 1.00
    [    1.512148usb usb1: New USB device foundidVendor=1d6bidProduct=0002
    [    1.512152usb usb1: New USB device stringsMfr=3Product=2SerialNumber=1
    [    1.512156usb usb1ProductEHCI Host Controller
    [    1.512159usb usb1ManufacturerLinux 4.4.0-121-generic ehci_hcd
    [    1.512162usb usb1SerialNumber0000:00:1d.7
    [    1.512418hub 1-0:1.0USB hub found
    [    1.512432hub 1-0:1.08 ports detected
    [    1.512817ehci-platformEHCI generic platform driver
    [    1.512846ohci_hcdUSB 1.1 'Open' Host Controller (OHCIDriver
    [    1.512856ohci-pciOHCI PCI platform driver
    [    1.512883ohci-platformOHCI generic platform driver
    [    1.512902uhci_hcdUSB Universal Host Controller Interface driver
    [    1.513140uhci_hcd 0000:00:1d.0UHCI Host Controller
    [    1.513151uhci_hcd 0000:00:1d.0: new USB bus registeredassigned bus number 2
    [    1.513162uhci_hcd 0000:00:1d.0detected 2 ports
    [    1.513187uhci_hcd 0000:00:1d.0irq 23io base 0x00003000
    [    1.513272usb usb2: New USB device foundidVendor=1d6bidProduct=0001
    [    1.513277usb usb2: New USB device stringsMfr=3Product=2SerialNumber=1
    [    1.513280usb usb2ProductUHCI Host Controller
    [    1.513283usb usb2ManufacturerLinux 4.4.0-121-generic uhci_hcd
    [    1.513286usb usb2SerialNumber0000:00:1d.0
    [    1.513516hub 2-0:1.0USB hub found
    [    1.513530hub 2-0:1.02 ports detected
    [    1.513937uhci_hcd 0000:00:1d.1UHCI Host Controller
    [    1.513948uhci_hcd 0000:00:1d.1: new USB bus registeredassigned bus number 3
    [    1.513962uhci_hcd 0000:00:1d.1detected 2 ports
    [    1.513997uhci_hcd 0000:00:1d.1irq 19io base 0x00003020
    [    1.514077usb usb3: New USB device foundidVendor=1d6bidProduct=0001
    [    1.514082usb usb3: New USB device stringsMfr=3Product=2SerialNumber=1
    [    1.514085usb usb3ProductUHCI Host Controller
    [    1.514088usb usb3ManufacturerLinux 4.4.0-121-generic uhci_hcd
    [    1.514091usb usb3SerialNumber0000:00:1d.1
    [    1.514315hub 3-0:1.0USB hub found
    [    1.514332hub 3-0:1.02 ports detected
    [    1.514745uhci_hcd 0000:00:1d.2UHCI Host Controller
    [    1.514756uhci_hcd 0000:00:1d.2: new USB bus registeredassigned bus number 4
    [    1.514766uhci_hcd 0000:00:1d.2detected 2 ports
    [    1.514801uhci_hcd 0000:00:1d.2irq 18io base 0x00003040
    [    1.514882usb usb4: New USB device foundidVendor=1d6bidProduct=0001
    [    1.514886usb usb4: New USB device stringsMfr=3Product=2SerialNumber=1
    [    1.514890usb usb4ProductUHCI Host Controller
    [    1.514893usb usb4ManufacturerLinux 4.4.0-121-generic uhci_hcd
    [    1.514896usb usb4SerialNumber0000:00:1d.2
    [    1.515119hub 4-0:1.0USB hub found
    [    1.515132hub 4-0:1.02 ports detected
    [    1.515503uhci_hcd 0000:00:1d.3UHCI Host Controller
    [    1.515514uhci_hcd 0000:00:1d.3: new USB bus registeredassigned bus number 5
    [    1.515524uhci_hcd 0000:00:1d.3detected 2 ports
    [    1.515562uhci_hcd 0000:00:1d.3irq 16io base 0x00003060
    [    1.515645usb usb5: New USB device foundidVendor=1d6bidProduct=0001
    [    1.515650usb usb5: New USB device stringsMfr=3Product=2SerialNumber=1
    [    1.515653usb usb5ProductUHCI Host Controller
    [    1.515656usb usb5ManufacturerLinux 4.4.0-121-generic uhci_hcd
    [    1.515659usb usb5SerialNumber0000:00:1d.3
    [    1.515879hub 5-0:1.0USB hub found
    [    1.515892hub 5-0:1.02 ports detected
    [    1.516222i8042PNPPS/2 Controller [PNP0303:KBCat 0x60,0x64 irq 1
    [    1.516226i8042PNPPS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    1.516834serioi8042 KBD port at 0x60,0x64 irq 1
    [    1.517088mousedevPS/2 mouse device common for all mice
    [    1.517425rtc_cmos 00:01RTC can wake from S4
    [    1.517606rtc_cmos 00:01rtc coreregistered rtc_cmos as rtc0
    [    1.517639rtc_cmos 00:01alarms up to one monthy3k114 bytes nvramhpet irqs
    [    1.517659i2c /dev entries driver
    [    1.517788device-mapperueventversion 1.0.3
    [    1.517939device-mapperioctl4.34.0-ioctl (2015-10-28initialiseddm-devel@redhat.com
    [    1.517971ledtrig-cpuregistered to indicate activity on CPUs
    [    1.518625NETRegistered protocol family 10
    [    1.518996NETRegistered protocol family 17
    [    1.519018Key type dns_resolver registered
    [    1.519378microcodeCPU0 sig=0xf41pf=0x10revision=0x17
    [    1.519396microcodeCPU1 sig=0xf41pf=0x10revision=0x17
    [    1.519478microcodeMicrocode Update Driverv2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [    1.519836registered taskstats version 1
    [    1.519859Loading compiled-in X.509 certificates
    [    1.521495Loaded X.509 cert 'Build time autogenerated kernel key: 7313be7968352def4636fc78cffaedd8e00d85eb'
    [    1.521534zswaploaded using pool lzo/zbud
    [    1.526066Key type trusted registered
    [    1.534460Key type encrypted registered
    [    1.534478AppArmorAppArmor sha1 policy hashing enabled
    [    1.535046tpm tpm0A TPM error (6occurred attempting to read a pcr value
    [    1.535051imaNo TPM chip foundactivating TPM-bypass!
    [    
    1.535102evmHMAC attrs0x1
    [    1.535477]   Magic number2:268:889
    [    1.535541ata_piix 0000:00:1f.2hash matches
    [    1.535607rtc_cmos 00:01setting system clock to 2018-05-06 14:52:12 UTC (1525618332)
    [    
    1.535797BIOS EDD facility v0.16 2004-Jun-250 devices found
    [    1.535801EDD information not available.
    [    
    1.535919PMHibernation image not present or could not be loaded.
    [    
    1.537205inputAT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [    1.675012ata2.01ATAPIATAPI   iHAS324   ABL1Dmax UDMA/100
    [    1.675221ata1.00ATA-8WDC WD5000AAKB-00H8A005.04E05max UDMA/133
    [    1.675227ata1.00976773168 sectorsmulti 16LBA48 
    [    1.675234ata1.00limited to UDMA/33 due to 40-wire cable
    [    1.688327ata2.01configured for UDMA/100
    [    1.689267ata1.00configured for UDMA/33
    [    1.689502scsi 0:0:0:0Direct-Access     ATA      WDC WD5000AAKB-0 4E05 PQ0 ANSI5
    [    1.689865sd 0:0:0:0: [sda976773168 512-byte logical blocks: (500 GB/466 GiB)
    [    
    1.689966sd 0:0:0:0Attached scsi generic sg0 type 0
    [    1.690027sd 0:0:0:0: [sdaWrite Protect is off
    [    1.690037sd 0:0:0:0: [sdaMode Sense00 3a 00 00
    [    1.690124sd 0:0:0:0: [sdaWrite cacheenabledread cacheenableddoesn't support DPO or FUA
    [    1.691201] scsi 1:0:1:0: CD-ROM            ATAPI    iHAS324   A      BL1D PQ: 0 ANSI: 5
    [    1.710604] sr 1:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.710610] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.710839] sr 1:0:1:0: Attached scsi CD-ROM sr0
    [    1.710986] sr 1:0:1:0: Attached scsi generic sg1 type 5
    [    1.719740]  sda: sda1 sda2 < sda5 >
    [    1.720424] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.722356] Freeing unused kernel memory: 1512K
    [    1.722361] Write protecting the kernel read-only data: 14336k
    [    1.723849] Freeing unused kernel memory: 1908K
    [    1.724274] Freeing unused kernel memory: 80K
    [    1.755518] systemd-udevd[117]: starting version 204
    [    1.816195] pps_core: LinuxPPS API ver. 1 registered
    [    1.816202] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [    1.820894] PTP clock support registered
    [    1.828166] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
    [    1.829336] usb 1-4: new high-speed USB device number 2 using ehci-pci
    [    1.838681] [drm] Initialized drm 1.1.0 20060810
    [    1.855202] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    [    1.855209] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    [    1.855509] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [    1.887238] FDC 0 is a National Semiconductor PC87306
    [    1.920404] e1000e 0000:02:00.0: Warning: detected DSPD enabled in EEPROM
    [    1.950358] [drm] Memory usable by graphics device = 256M
    [    1.950369] checking generic (c0000000 300000) vs hw (c0000000 10000000)
    [    1.950373] fb: switching to inteldrmfb from VESA VGA
    [    1.950439] Console: switching to colour dummy device 80x25
    [    1.950629] [drm] Replacing VGA console driver
    [    1.950771] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [    1.950777] [drm] Driver supports precise vblank timestamp query.
    [    1.953827] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [    1.961222] usb 1-4: New USB device found, idVendor=0bda, idProduct=a811
    [    1.961232] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    1.961238] usb 1-4: Product: 802.11ac WLAN Adapter 
    [    1.961243] usb 1-4: Manufacturer: Realtek 
    [    1.961248] usb 1-4: SerialNumber: 00e04c000001
    [    1.983522] [drm] initialized overlay support
    [    1.985557] e1000e 0000:02:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:14:85:9f:6d:02
    [    1.985567] e1000e 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
    [    1.985708] e1000e 0000:02:00.0 eth0: MAC: 2, PHY: 2, PBA No: FFFFFF-0FF
    [    2.074270] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
    [    2.081061] fbcon: inteldrmfb (fb0) is primary device
    [    2.081231] Console: switching to colour frame buffer device 170x48
    [    2.081284] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [    2.216046] tsc: Refined TSC clocksource calibration: 2992.499 MHz
    [    2.216054] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b2297a4c00, max_idle_ns: 440795286487 ns
    [    2.460043] usb 4-1: new full-speed USB device number 2 using uhci_hcd
    [    2.813083] usb 4-1: New USB device found, idVendor=0451, idProduct=2046
    [    2.813088] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [    2.816181] hub 4-1:1.0: USB hub found
    [    2.818080] hub 4-1:1.0: 4 ports detected
    [    3.116030] usb 4-2: new low-speed USB device number 3 using uhci_hcd
    [    3.216181] clocksource: Switched to clocksource tsc
    [    3.497079] usb 4-2: New USB device found, idVendor=046d, idProduct=c51b
    [    3.497083] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [    3.497087] usb 4-2: Product: USB Receiver
    [    3.497090] usb 4-2: Manufacturer: Logitech
    [    3.518551] hidraw: raw HID events driver (C) Jiri Kosina
    [    3.532062] usb 4-1.3: new full-speed USB device number 4 using uhci_hcd
    [    3.549273] usbcore: registered new interface driver usbhid
    [    3.549279] usbhid: USB HID core driver
    [    3.553464] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:046D:C51B.0001/input/input3
    [    3.553811] hid-generic 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
    [    3.557936] hid-generic 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
    [    3.636083] usb 4-1.3: not running at top speed; connect to a high speed hub
    [    3.673077] usb 4-1.3: New USB device found, idVendor=0781, idProduct=b6b7
    [    3.673083] usb 4-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=5
    [    3.673087] usb 4-1.3: Product: ImageMate 9 in 1 Reader/Writer
    [    3.673090] usb 4-1.3: Manufacturer: SanDisk 
    [    3.673093] usb 4-1.3: SerialNumber: 200612080B
    [    3.681612] usb-storage 4-1.3:1.0: USB Mass Storage device detected
    [    3.681890] scsi host2: usb-storage 4-1.3:1.0
    [    3.682117] usbcore: registered new interface driver usb-storage
    [    3.684792] usbcore: registered new interface driver uas
    [    3.852029] usb 5-2: new full-speed USB device number 2 using uhci_hcd
    [    4.027088] usb 5-2: New USB device found, idVendor=0a5c, idProduct=21e8
    [    4.027093] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    4.027097] usb 5-2: Product: BCM20702A0
    [    4.027101] usb 5-2: Manufacturer: Broadcom Corp
    [    4.027104] usb 5-2: SerialNumber: 5CF37087E384
    [    4.684112] scsi 2:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9335 PQ: 0 ANSI: 0
    [    4.685021] sd 2:0:0:0: Attached scsi generic sg2 type 0
    [    4.699109] sd 2:0:0:0: [sdb] Attached SCSI removable disk
    [    5.542529] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [    6.288493] random: init: uninitialized urandom read (12 bytes read, 106 bits of entropy available)
    [    6.703893] random: nonblocking pool is initialized
    [   16.288445] Adding 2083836k swap on /dev/sda5.  Priority:-1 extents:1 across:2083836k FS
    [   16.675919] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    [   16.732271] systemd-udevd[360]: starting version 204
    [   17.247060] lp: driver loaded but no devices found
    [   17.380782] ppdev: user-space parallel port driver
    [   17.417694] parport_pc 00:07: reported by Plug and Play ACPI
    [   17.417897] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    [   17.512494] lp0: using parport0 (interrupt-driven).
    [   17.539890] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   17.768766] intel_rng: FWH not detected
    [   18.079207] device-mapper: multipath: version 1.10.0 loaded
    [   18.085960] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000102F (\_SB_.PCI0.LPC0.PMIO) (20150930/utaddress-254)
    [   18.085978] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   18.085987] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011AF (\_SB_.PCI0.LPC0.GPOX) (20150930/utaddress-254)
    [   18.085997] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   18.086159] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [   18.232153] leds_ss4200: no LED devices found
    [   19.110789] Bluetooth: Core ver 2.21
    [   19.112002] NET: Registered protocol family 31
    [   19.112039] Bluetooth: HCI device and connection manager initialized
    [   19.112068] Bluetooth: HCI socket layer initialized
    [   19.112094] Bluetooth: L2CAP socket layer initialized
    [   19.112119] Bluetooth: SCO socket layer initialized
    [   19.253799] Bluetooth: RFCOMM TTY layer initialized
    [   19.253817] Bluetooth: RFCOMM socket layer initialized
    [   19.253831] Bluetooth: RFCOMM ver 1.11
    [   19.289544] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   19.289552] Bluetooth: BNEP filters: protocol multicast
    [   19.289561] Bluetooth: BNEP socket layer initialized
    [   19.402642] usbcore: registered new interface driver btusb
    [   19.438662] gpio_ich: GPIO from 462 to 511 on gpio_ich
    [   19.524145] Bluetooth: hci0: BCM: chip id 63
    [   19.556145] Bluetooth: hci0: SurfersMintu1-0
    [   19.558153] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
    [   19.821924] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e8.hcd failed with error -2
    [   19.821936] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e8.hcd not found
    [   20.255889] init: failsafe main process (596) killed by TERM signal
    [   20.488667] init: cups main process (563) killed by HUP signal
    [   20.488712] init: cups main process ended, respawning
    [   24.552617] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   25.145433] init: samba-ad-dc main process (1054) terminated with status 1
    [   26.233343] init: plymouth-upstart-bridge main process ended, respawning
    [   26.254135] init: plymouth-upstart-bridge main process (1124) terminated with status 1
    [   26.254176] init: plymouth-upstart-bridge main process ended, respawning
    [   27.428919] init: plymouth-stop pre-start process (1332) terminated with status 1
    [ 1045.386717] systemd-hostnamed[2183]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
    [ 1819.660941] usb 1-4: USB disconnect, device number 2
    [ 2055.328069] usb 1-7: new high-speed USB device number 6 using ehci-pci
    [ 2055.466677] usb 1-7: New USB device found, idVendor=0bda, idProduct=8187
    [ 2055.466687] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 2055.466694] usb 1-7: Product: RTL8187_Wireless
    [ 2055.466699] usb 1-7: Manufacturer: Manufacturer_Realtek_RTL8187_
    [ 2055.466705] usb 1-7: SerialNumber: 00C0CA473310
    [ 2055.683717] cfg80211: World regulatory domain updated:
    [ 2055.683727] cfg80211:  DFS Master region: unset
    [ 2055.683730] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 2055.683737] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 2055.683742] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 2055.683747] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 2055.683751] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 2055.683756] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 2055.878258] ieee80211 phy0: Selected rate control algorithm '
    minstrel_ht'
    [ 2055.878871] ieee80211 phy0: hwaddr 00:c0:ca:47:33:10, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
    [ 2055.890803] rtl8187: Customer ID is 0xFF
    [ 2055.903056] rtl8187: wireless switch is on
    [ 2055.906108] usbcore: registered new interface driver rtl8187
    [ 2058.016989] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 2061.773454] wlan0: authenticate with 00:22:3f:9e:66:b8
    [ 2061.989851] wlan0: send auth to 00:22:3f:9e:66:b8 (try 1/3)
    [ 2061.992294] wlan0: authenticated
    [ 2061.996068] wlan0: associate with 00:22:3f:9e:66:b8 (try 1/3)
    [ 2061.999825] wlan0: RX AssocResp from 00:22:3f:9e:66:b8 (capab=0x431 status=0 aid=3)
    [ 2062.000675] wlan0: associated
    [ 2062.000766] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 2062.053253] wlan0: deauthenticating from 00:22:3f:9e:66:b8 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
    [ 2062.161063] wlan0: authenticate with 00:22:3f:9e:66:b8
    [ 2062.273845] wlan0: send auth to 00:22:3f:9e:66:b8 (try 1/3)
    [ 2062.280059] wlan0: authenticated
    [ 2062.282390] cfg80211: World regulatory domain updated:
    [ 2062.282401] cfg80211:  DFS Master region: unset
    [ 2062.282405] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 2062.282412] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 2062.282418] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 2062.282422] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 2062.282427] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 2062.282431] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 2062.285412] wlan0: associate with 00:22:3f:9e:66:b8 (try 1/3)
    [ 2062.288954] wlan0: RX AssocResp from 00:22:3f:9e:66:b8 (capab=0x431 status=0 aid=3)
    [ 2062.289670] wlan0: associated
    [ 3290.864122] usb 5-2: USB disconnect, device number 2
    [ 3295.668065] usb 1-8: new high-speed USB device number 7 using ehci-pci
    [ 3295.801151] usb 1-8: New USB device found, idVendor=0bda, idProduct=a811
    [ 3295.801159] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 3295.801163] usb 1-8: Product: 802.11ac WLAN Adapter 
    [ 3295.801167] usb 1-8: Manufacturer: Realtek 
    [ 3295.801170] usb 1-8: SerialNumber: 00e04c000001
    [ 3296.342525] 8812au: loading out-of-tree module taints kernel.
    [ 3296.344374] 8812au: module verification failed: signature and/or required key missing - tainting kernel
    [ 3296.493334] usbcore: registered new interface driver rtl8812au
    [ 3297.250078] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
    [ 3297.252650] RTL871X: indicate disassoc
    [ 3297.254236] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
    [ 3297.259479] RTL871X: set bssid:00:00:00:00:00:00
    [ 3297.259605] RTL871X: set ssid [g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9a\xffffff81&\xffffffeb\xffffff83\xffffff82\xffffff83\xffffff82\xffffffe5a\xffffff9d8\xfffffff2\xffffffac\xffffff81\xffffffff\xffffffff\xffffffff\xffffffff \xffffffbe\xffffffd9u] fw_state=0x00000008
    [ 3304.060375] RTL871X: set ssid [BassPlayer] fw_state=0x00000008
    [ 3304.060424] RTL871X: set bssid:00:22:3f:9e:66:b8
    [ 3304.368551] RTL871X: start auth
    [ 3304.373151] RTL871X: auth success, start assoc
    [ 3304.377794] RTL871X: assoc success
    [ 3304.377928] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
    [ 3304.379908] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x000fffff
    [ 3304.379908]      ==> rssi_level:0, rate_bitmap:0x000ff015
    [ 3304.381047] RTL871X: send eapol packet
    [ 3304.385970] RTL871X: send eapol packet
    [ 3304.388647] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
    [ 3304.388654] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    [ 3305.270531] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x000fffff
    [ 3305.270531]      ==> rssi_level:2, rate_bitmap:0x000ff000
    [ 3316.115341] usb 1-7: USB disconnect, device number 6
    [ 3316.128083] wlan0: deauthenticating from 00:22:3f:9e:66:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 3316.459278] cfg80211: World regulatory domain updated:
    [ 3316.459287] cfg80211:  DFS Master region: unset
    [ 3316.459290] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [ 3316.459295] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 3316.459299] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 3316.459302] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 3316.459306] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 3316.459309] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [ 3460.641089] perf interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
    [ 3580.881433] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    [ 3580.881462] RTL871X: send eapol packet
    [ 3867.824113] systemd-hostnamed[7022]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
    [ 4180.899880] RTL871X: send eapol packet
    [ 4180.900268] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    [ 4780.965094] RTL871X: send eapol packet
    [ 4780.965525] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    [ 5381.084788] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    [ 5381.084833] RTL871X: send eapol packet
    [ 5981.120871] RTL871X: send eapol packet
    [ 5981.121290] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    [ 6580.980507] RTL871X: send eapol packet
    [ 6580.980945] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    [ 6822.611437] perf interrupt took too long (5004 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
    [ 7180.927290] RTL871X: send eapol packet
    [ 7180.927508] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    joseph@SurfersMintu1 ~ $ 


    ..... and THIS appears to be a problem: (extracted from above (^))

    PHP Code:
    3295.668065usb 1-8: new high-speed USB device number 7 using ehci-pci
    3295.801151usb 1-8: New USB device foundidVendor=0bdaidProduct=a811
    3295.801159usb 1-8: New USB device stringsMfr=1Product=2SerialNumber=3
    3295.801163usb 1-8Product802.11ac WLAN Adapter 
    3295.801167usb 1-8ManufacturerRealtek 
    3295.801170usb 1-8SerialNumber00e04c000001
    3296.3425258812auloading out-of-tree module taints kernel.
    3296.3443748812aumodule verification failedsignature and/or required key missing tainting kernel
    3296.493334usbcoreregistered new interface driver rtl8812au
    3297.250078IPv6ADDRCONF(NETDEV_UP): wlan1link is not ready
    3297.252650RTL871Xindicate disassoc
    3297.254236IPv6ADDRCONF(NETDEV_UP): wlan1link is not ready
    3297.259479RTL871Xset bssid:00:00:00:00:00:00
    3297.259605RTL871Xset ssid [g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9a\xffffff81&\xffffffeb\xffffff83\xffffff82\xffffff83\xffffff82\xffffffe5a\xffffff9d8\xfffffff2\xffffffac\xffffff81\xffffffff\xffffffff\xffffffff\xffffffff \xffffffbe\xffffffd9ufw_state=0x00000008
    3304.060375RTL871Xset ssid [BassPlayerfw_state=0x00000008
    3304.060424RTL871Xset bssid:00:22:3f:9e:66:b8
    3304.368551RTL871Xstart auth
    3304.373151RTL871Xauth successstart assoc
    3304.377794RTL871Xassoc success
    3304.377928IPv6ADDRCONF(NETDEV_CHANGE): wlan1link becomes ready
    3304.379908UpdateHalRAMask8812A => mac_id:0networkType:0x0bmask:0x000fffff
    3304.379908]      ==> rssi_level:0rate_bitmap:0x000ff015
    3304.381047RTL871Xsend eapol packet
    3304.385970RTL871Xsend eapol packet
    3304.388647RTL871Xset pairwise key to hwalg:4(WEP40-1 WEP104-5 TKIP-2 AES-4camid:4
    3304.388654RTL871Xset group key to hwalg:2(WEP40-1 WEP104-5 TKIP-2 AES-4keyid:1
    3305.270531UpdateHalRAMask8812A => mac_id:0networkType:0x0bmask:0x000fffff
    3305.270531]      ==> rssi_level:2rate_bitmap:0x000ff000
    3316.115341usb 1-7USB disconnectdevice number 6
    3316.128083wlan0deauthenticating from 00:22:3f:9e:66:b8 by local choice (Reason3=DEAUTH_LEAVING)
    3316.459278cfg80211World regulatory domain updated:
    3316.459287cfg80211:  DFS Master region: unset
    3316.459290cfg80211:   (start_freq end_freq bandwidth), (max_antenna_gainmax_eirp), (dfs_cac_time)
    3316.459295cfg80211:   (2402000 KHz 2472000 KHz 40000 KHz), (300 mBi2000 mBm), (N/A)
    3316.459299cfg80211:   (2457000 KHz 2482000 KHz 40000 KHz), (300 mBi2000 mBm), (N/A)
    3316.459302cfg80211:   (2474000 KHz 2494000 KHz 20000 KHz), (300 mBi2000 mBm), (N/A)
    3316.459306cfg80211:   (5170000 KHz 5250000 KHz 40000 KHz), (300 mBi2000 mBm), (N/A)
    3316.459309cfg80211:   (5735000 KHz 5835000 KHz 40000 KHz), (300 mBi2000 mBm), (N/A


    Warum werden wir so früh alt und klug so spät?

  3. #3
    Senior Member
    Join Date
    Dec 2004
    Posts
    1,067

    Default Re: RTL8812AU Is Still Bugging me!

    That looks quite messy Joe.

    Here's outputs of mine, which drivers were installed before device was connected.

    dmesg:

    Code:
    [110852.470112] usb 6-2: new high-speed USB device number 2 using xhci_hcd
    [110852.620733] usb 6-2: New USB device found, idVendor=0bda, idProduct=8812
    [110852.620739] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [110852.620741] usb 6-2: Product: 802.11n NIC
    [110852.620744] usb 6-2: Manufacturer: Realtek
    [110852.620746] usb 6-2: SerialNumber: 123456
    [110853.713428] cfg80211: Loading compiled-in X.509 certificates for regulatory database
    [110853.716142] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
    [110853.716180] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
    [110853.716181] cfg80211: failed to load regulatory.db
    [110853.802526] 8812au: loading out-of-tree module taints kernel.
    [110853.804057] 8812au: module verification failed: signature and/or required key missing - tainting kernel
    [110854.602652] usbcore: registered new interface driver rtl8812au
    [110854.636719] rtl8812au 6-2:1.0 wlx000f004fd689: renamed from wlan0
    [110854.672602] IPv6: ADDRCONF(NETDEV_UP): wlx000f004fd689: link is not ready
    [111415.165334] IPv6: ADDRCONF(NETDEV_CHANGE): wlx000f004fd689: link becomes ready
    lsusb:

    Code:
    Bus 006 Device 002: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
    ip addr:

    Code:
    3: wlx000f004fd689: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
        link/ether 00:0f:00:4f:d6:89 brd ff:ff:ff:ff:ff:ff
        inet 192.168.1.102/24 brd 192.168.1.255 scope global dynamic wlx000f004fd689
           valid_lft 85973sec preferred_lft 85973sec
        inet6 fe80::5288:a7d8:1a19:1ad1/64 scope link 
           valid_lft forever preferred_lft forever
    lsmod:

    Code:
    8812au               1454080  0
    cfg80211              622592  1 8812au
    rfkill list:
    Code:
    1: phy0: Wireless LAN
    	Soft blocked: no
    	Hard blocked: no
    sudo lshw:

    Code:
                  *-usb
                       description: Generic USB device
                       product: 802.11n NIC
                       vendor: Realtek
                       physical id: 2
                       bus info: usb@6:2
                       version: 0.00
                       serial: 123456
                       capabilities: usb-2.00
                       configuration: driver=rtl8812au maxpower=500mA speed=480Mbit/s
      *-network
           description: Wireless interface
           physical id: 1
           bus info: usb@6:2
           logical name: wlx000f004fd689
           serial: 00:0f:00:4f:d6:89
           capabilities: ethernet physical wireless
           configuration: broadcast=yes driver=rtl8812au ip=192.168.1.102 multicast=yes wireless=IEEE 802.11an
    inxi -Nxxx:

    Code:
               Card-2: Realtek RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
               driver: rtl8812au usb-ID: 006-002 chip-ID: 0bda:8812
    lsusb -vd :8812

    Code:
    Bus 006 Device 002: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
    Couldn't open device, some information will be missing
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               2.00
      bDeviceClass            0 (Defined at Interface level)
      bDeviceSubClass         0 
      bDeviceProtocol         0 
      bMaxPacketSize0        64
      idVendor           0x0bda Realtek Semiconductor Corp.
      idProduct          0x8812 RTL8812AU 802.11a/b/g/n/ac WLAN Adapter
      bcdDevice            0.00
      iManufacturer           1 
      iProduct                2 
      iSerial                 3 
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength           53
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0 
        bmAttributes         0x80
          (Bus Powered)
        MaxPower              500mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           5
          bInterfaceClass       255 Vendor Specific Class
          bInterfaceSubClass    255 Vendor Specific Subclass
          bInterfaceProtocol    255 Vendor Specific Protocol
          iInterface              0 
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0200  1x 512 bytes
            bInterval               0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x02  EP 2 OUT
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0200  1x 512 bytes
            bInterval               0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x03  EP 3 OUT
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0200  1x 512 bytes
            bInterval               0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x04  EP 4 OUT
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0200  1x 512 bytes
            bInterval               0
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x85  EP 5 IN
            bmAttributes            3
              Transfer Type            Interrupt
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0040  1x 64 bytes
            bInterval               1

  4. #4
    Smiling Down On Youse SurferJoe46's Avatar
    Join Date
    May 2005
    Location
    Hamilton, Montana, USA
    Posts
    14,317

    Default Re: RTL8812AU Is Still Bugging me!

    Yeah - I tried the dmesg and got this:

    Code:
    pref] to [bus 04] add_size 200000 add_align 100000
    [    0.289126] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
    [    0.289146] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
    [    0.289150] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
    [    0.289154] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
    [    0.289158] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
    [    0.289163] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
    [    0.289167] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
    [    0.289171] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
    [    0.289175] pci 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
    [    0.289188] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
    [    0.289194] pci 0000:00:1c.1: BAR 14: assigned [mem 0x80200000-0x803fffff]
    [    0.289203] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
    [    0.289209] pci 0000:00:02.1: BAR 0: assigned [mem 0x80600000-0x8067ffff]
    [    0.289217] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
    [    0.289224] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [    0.289228] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
    [    0.289235] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd00fffff]
    [    0.289241] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
    [    0.289249] pci 0000:00:1c.1: PCI bridge to [bus 04]
    [    0.289253] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
    [    0.289260] pci 0000:00:1c.1:   bridge window [mem 0x80200000-0x803fffff]
    [    0.289265] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
    [    0.289274] pci 0000:00:1e.0: PCI bridge to [bus 0a]
    [    0.289279] pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
    [    0.289293] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
    [    0.289297] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff window]
    [    0.289301] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff window]
    [    0.289304] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
    [    0.289307] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
    [    0.289310] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
    [    0.289314] pci_bus 0000:00: resource 10 [mem 0x80000000-0xfebfffff window]
    [    0.289317] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed40fff window]
    [    0.289320] pci_bus 0000:00: resource 12 [io  0x0d00-0xffff window]
    [    0.289324] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
    [    0.289327] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd00fffff]
    [    0.289330] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
    [    0.289334] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
    [    0.289337] pci_bus 0000:04: resource 1 [mem 0x80200000-0x803fffff]
    [    0.289341] pci_bus 0000:04: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
    [    0.289344] pci_bus 0000:0a: resource 0 [io  0x5000-0x5fff]
    [    0.289347] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7 window]
    [    0.289351] pci_bus 0000:0a: resource 5 [mem 0x000a0000-0x000bffff window]
    [    0.289354] pci_bus 0000:0a: resource 6 [mem 0x000d0000-0x000d3fff window]
    [    0.289357] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff window]
    [    0.289360] pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff window]
    [    0.289363] pci_bus 0000:0a: resource 9 [mem 0x000dc000-0x000dffff window]
    [    0.289367] pci_bus 0000:0a: resource 10 [mem 0x80000000-0xfebfffff window]
    [    0.289370] pci_bus 0000:0a: resource 11 [mem 0xfed40000-0xfed40fff window]
    [    0.289373] pci_bus 0000:0a: resource 12 [io  0x0d00-0xffff window]
    [    0.289435] NET: Registered protocol family 2
    [    0.289732] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [    0.289804] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [    0.289899] TCP: Hash tables configured (established 16384 bind 16384)
    [    0.289969] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [    0.289989] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [    0.290083] NET: Registered protocol family 1
    [    0.290121] pci 0000:00:02.0: Video device with shadowed ROM
    [    0.292111] PCI: CLS 32 bytes, default 64
    [    0.292229] Unpacking initramfs...
    [    1.221964] Freeing initrd memory: 35808K
    [    1.222276] Scanning for low memory corruption every 60 seconds
    [    1.222911] audit: initializing netlink subsys (disabled)
    [    1.222946] audit: type=2000 audit(1525640396.220:1): initialized
    [    1.223480] Initialise system trusted keyring
    [    1.223713] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [    1.227460] zbud: loaded
    [    1.228155] VFS: Disk quotas dquot_6.6.0
    [    1.228233] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    1.228879] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    1.229318] fuse init (API version 7.23)
    [    1.229632] Key type big_key registered
    [    1.229664] Allocating IMA MOK and blacklist keyrings.
    [    1.230456] Key type asymmetric registered
    [    1.230464] Asymmetric key parser 'x509' registered
    [    1.230559] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
    [    1.230626] io scheduler noop registered
    [    1.230633] io scheduler deadline registered (default)
    [    1.230706] io scheduler cfq registered
    [    1.231287] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
    [    1.231622] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    1.231640] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    1.231706] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [    1.231709] vesafb: scrolling: redraw
    [    1.231712] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [    1.231735] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90000400000, using 3072k, total 3072k
    [    1.231931] Console: switching to colour frame buffer device 128x48
    [    1.231954] fb0: VESA VGA frame buffer device
    [    1.232168] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0C:00/input/input0
    [    1.232176] ACPI: Power Button [PWRB]
    [    1.232264] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    1.232270] ACPI: Power Button [PWRF]
    [    1.233900] thermal LNXTHERM:00: registered as thermal_zone0
    [    1.233905] ACPI: Thermal Zone [THM0] (60 C)
    [    1.233980] GHES: HEST is not enabled!
    [    1.234183] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    1.254628] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [    1.257949] Linux agpgart interface v0.103
    [    1.258063] agpgart-intel 0000:00:00.0: Intel 945G Chipset
    [    1.258096] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
    [    1.258438] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [    1.258606] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
    [    1.258803] tpm_tis 00:08: [irq 10]
    [    1.258813] tpm_tis 00:08: [mem 0xfed40000-0xfed40fff]
    [    1.259029] tpm_tis 00:08: activated
    [    1.280061] tpm_tis 00:08: 1.2 TPM (device-id 0xFE, rev-id 3)
    [    1.342266] tpm tpm0: TPM is disabled/deactivated (0x6)
    [    1.345461] loop: module loaded
    [    1.345772] ata_piix 0000:00:1f.2: version 2.13
    [    1.346013] ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
    [    1.501516] scsi host0: ata_piix
    [    1.501742] scsi host1: ata_piix
    [    1.501839] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30b0 irq 14
    [    1.501845] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30b8 irq 15
    [    1.502201] libphy: Fixed MDIO Bus: probed
    [    1.502209] tun: Universal TUN/TAP device driver, 1.6
    [    1.502212] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    1.502328] PPP generic driver version 2.4.2
    [    1.502468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.502486] ehci-pci: EHCI PCI platform driver
    [    1.502769] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [    1.502782] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [    1.502801] ehci-pci 0000:00:1d.7: debug port 1
    [    1.506714] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
    [    1.506742] ehci-pci 0000:00:1d.7: irq 23, io mem 0xd03c0000
    [    1.516051] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    1.516150] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    1.516155] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.516158] usb usb1: Product: EHCI Host Controller
    [    1.516162] usb usb1: Manufacturer: Linux 4.4.0-121-generic ehci_hcd
    [    1.516165] usb usb1: SerialNumber: 0000:00:1d.7
    [    1.516422] hub 1-0:1.0: USB hub found
    [    1.516437] hub 1-0:1.0: 8 ports detected
    [    1.516820] ehci-platform: EHCI generic platform driver
    [    1.516848] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.516858] ohci-pci: OHCI PCI platform driver
    [    1.516885] ohci-platform: OHCI generic platform driver
    [    1.516908] uhci_hcd: USB Universal Host Controller Interface driver
    [    1.517138] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    1.517150] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    1.517160] uhci_hcd 0000:00:1d.0: detected 2 ports
    [    1.517185] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003000
    [    1.517271] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    [    1.517276] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.517279] usb usb2: Product: UHCI Host Controller
    [    1.517282] usb usb2: Manufacturer: Linux 4.4.0-121-generic uhci_hcd
    [    1.517285] usb usb2: SerialNumber: 0000:00:1d.0
    [    1.517523] hub 2-0:1.0: USB hub found
    [    1.517537] hub 2-0:1.0: 2 ports detected
    [    1.517916] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    1.517928] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [    1.517941] uhci_hcd 0000:00:1d.1: detected 2 ports
    [    1.517976] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
    [    1.518057] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    [    1.518061] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.518065] usb usb3: Product: UHCI Host Controller
    [    1.518068] usb usb3: Manufacturer: Linux 4.4.0-121-generic uhci_hcd
    [    1.518071] usb usb3: SerialNumber: 0000:00:1d.1
    [    1.518293] hub 3-0:1.0: USB hub found
    [    1.518307] hub 3-0:1.0: 2 ports detected
    [    1.518689] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    1.518702] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [    1.518711] uhci_hcd 0000:00:1d.2: detected 2 ports
    [    1.518744] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
    [    1.518825] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    [    1.518830] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.518833] usb usb4: Product: UHCI Host Controller
    [    1.518836] usb usb4: Manufacturer: Linux 4.4.0-121-generic uhci_hcd
    [    1.518839] usb usb4: SerialNumber: 0000:00:1d.2
    [    1.519063] hub 4-0:1.0: USB hub found
    [    1.519075] hub 4-0:1.0: 2 ports detected
    [    1.519456] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [    1.519467] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [    1.519477] uhci_hcd 0000:00:1d.3: detected 2 ports
    [    1.519514] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003060
    [    1.519595] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    1.519599] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    1.519602] usb usb5: Product: UHCI Host Controller
    [    1.519605] usb usb5: Manufacturer: Linux 4.4.0-121-generic uhci_hcd
    [    1.519608] usb usb5: SerialNumber: 0000:00:1d.3
    [    1.519831] hub 5-0:1.0: USB hub found
    [    1.519848] hub 5-0:1.0: 2 ports detected
    [    1.520166] i8042: PNP: PS/2 Controller [PNP0303:KBC] at 0x60,0x64 irq 1
    [    1.520171] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    1.520783] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.521030] mousedev: PS/2 mouse device common for all mice
    [    1.521373] rtc_cmos 00:01: RTC can wake from S4
    [    1.521553] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [    1.521586] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [    1.521606] i2c /dev entries driver
    [    1.521729] device-mapper: uevent: version 1.0.3
    [    1.521886] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
    [    1.521918] ledtrig-cpu: registered to indicate activity on CPUs
    [    1.522572] NET: Registered protocol family 10
    [    1.522948] NET: Registered protocol family 17
    [    1.522971] Key type dns_resolver registered
    [    1.523338] microcode: CPU0 sig=0xf41, pf=0x10, revision=0x17
    [    1.523356] microcode: CPU1 sig=0xf41, pf=0x10, revision=0x17
    [    1.523432] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [    1.523758] registered taskstats version 1
    [    1.523781] Loading compiled-in X.509 certificates
    [    1.525435] Loaded X.509 cert 'Build time autogenerated kernel key: 7313be7968352def4636fc78cffaedd8e00d85eb'
    [    1.525474] zswap: loaded using pool lzo/zbud
    [    1.530061] Key type trusted registered
    [    1.538458] Key type encrypted registered
    [    1.538475] AppArmor: AppArmor sha1 policy hashing enabled
    [    1.539100] tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
    [    1.539105] ima: No TPM chip found, activating TPM-bypass!
    [    1.539147] evm: HMAC attrs: 0x1
    [    1.539554]   Magic number: 2:10:1003
    [    1.539594] input input0: hash matches
    [    1.539614] vc vcs: hash matches
    [    1.539621] pnp 00:05: hash matches
    [    1.539691] rtc_cmos 00:01: setting system clock to 2018-05-06 20:59:58 UTC (1525640398)
    [    1.539884] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.539888] EDD information not available.
    [    1.540045] PM: Hibernation image not present or could not be loaded.
    [    1.541720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [    1.667548] ata2.01: ATAPI: ATAPI   iHAS324   A, BL1D, max UDMA/100
    [    1.668015] ata1.00: ATA-8: WDC WD5000AAKB-00H8A0, 05.04E05, max UDMA/133
    [    1.668021] ata1.00: 976773168 sectors, multi 16: LBA48 
    [    1.668027] ata1.00: limited to UDMA/33 due to 40-wire cable
    [    1.680157] ata2.01: configured for UDMA/100
    [    1.685005] ata1.00: configured for UDMA/33
    [    1.685245] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKB-0 4E05 PQ: 0 ANSI: 5
    [    1.685617] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
    [    1.685730] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [    1.685753] sd 0:0:0:0: [sda] Write Protect is off
    [    1.685762] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.685823] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.686983] scsi 1:0:1:0: CD-ROM            ATAPI    iHAS324   A      BL1D PQ: 0 ANSI: 5
    [    1.706438]  sda: sda1 sda2 < sda5 >
    [    1.706602] sr 1:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [    1.706609] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    1.706848] sr 1:0:1:0: Attached scsi CD-ROM sr0
    [    1.707049] sr 1:0:1:0: Attached scsi generic sg1 type 5
    [    1.707566] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.709526] Freeing unused kernel memory: 1512K
    [    1.709531] Write protecting the kernel read-only data: 14336k
    [    1.711020] Freeing unused kernel memory: 1908K
    [    1.711413] Freeing unused kernel memory: 80K
    [    1.743324] systemd-udevd[117]: starting version 204
    [    1.802584] [drm] Initialized drm 1.1.0 20060810
    [    1.809832] pps_core: LinuxPPS API ver. 1 registered
    [    1.809838] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [    1.813245] PTP clock support registered
    [    1.828190] usb 1-3: new high-speed USB device number 2 using ehci-pci
    [    1.841447] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
    [    1.879125] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
    [    1.879132] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
    [    1.879441] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [    1.893612] [drm] Memory usable by graphics device = 256M
    [    1.893624] checking generic (c0000000 300000) vs hw (c0000000 10000000)
    [    1.893628] fb: switching to inteldrmfb from VESA VGA
    [    1.893700] Console: switching to colour dummy device 80x25
    [    1.893920] [drm] Replacing VGA console driver
    [    1.894059] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [    1.894063] [drm] Driver supports precise vblank timestamp query.
    [    1.895577] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [    1.911324] FDC 0 is a National Semiconductor PC87306
    [    1.921566] [drm] initialized overlay support
    [    1.940451] e1000e 0000:02:00.0: Warning: detected DSPD enabled in EEPROM
    [    1.961182] usb 1-3: New USB device found, idVendor=0bda, idProduct=a811
    [    1.961191] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    1.961197] usb 1-3: Product: 802.11ac WLAN Adapter 
    [    1.961202] usb 1-3: Manufacturer: Realtek 
    [    1.961207] usb 1-3: SerialNumber: 00e04c000001
    [    2.004572] e1000e 0000:02:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:14:85:9f:6d:02
    [    2.004583] e1000e 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
    [    2.004602] e1000e 0000:02:00.0 eth0: MAC: 2, PHY: 2, PBA No: FFFFFF-0FF
    [    2.018511] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
    [    2.027202] fbcon: inteldrmfb (fb0) is primary device
    [    2.027378] Console: switching to colour frame buffer device 170x48
    [    2.027434] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [    2.220065] tsc: Refined TSC clocksource calibration: 2992.500 MHz
    [    2.220072] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b22988d548, max_idle_ns: 440795251469 ns
    [    2.256033] usb 4-1: new full-speed USB device number 2 using uhci_hcd
    [    2.405088] usb 4-1: New USB device found, idVendor=0451, idProduct=2046
    [    2.405092] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [    2.408186] hub 4-1:1.0: USB hub found
    [    2.410085] hub 4-1:1.0: 4 ports detected
    [    2.692031] usb 4-1.1: new full-speed USB device number 3 using uhci_hcd
    [    2.831085] usb 4-1.1: New USB device found, idVendor=0a5c, idProduct=21e8
    [    2.831091] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    2.831094] usb 4-1.1: Product: BCM20702A0
    [    2.831098] usb 4-1.1: Manufacturer: Broadcom Corp
    [    2.831101] usb 4-1.1: SerialNumber: 5CF37087E384
    [    2.908057] usb 4-1.3: new full-speed USB device number 4 using uhci_hcd
    [    3.012084] usb 4-1.3: not running at top speed; connect to a high speed hub
    [    3.049085] usb 4-1.3: New USB device found, idVendor=0781, idProduct=b6b7
    [    3.049089] usb 4-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=5
    [    3.049093] usb 4-1.3: Product: ImageMate 9 in 1 Reader/Writer
    [    3.049096] usb 4-1.3: Manufacturer: SanDisk 
    [    3.049099] usb 4-1.3: SerialNumber: 200612080B
    [    3.057652] usb-storage 4-1.3:1.0: USB Mass Storage device detected
    [    3.058037] scsi host2: usb-storage 4-1.3:1.0
    [    3.058264] usbcore: registered new interface driver usb-storage
    [    3.060928] usbcore: registered new interface driver uas
    [    3.220142] clocksource: Switched to clocksource tsc
    [    3.324028] usb 4-2: new low-speed USB device number 5 using uhci_hcd
    [    3.501082] usb 4-2: New USB device found, idVendor=046d, idProduct=c51b
    [    3.501087] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [    3.501090] usb 4-2: Product: USB Receiver
    [    3.501094] usb 4-2: Manufacturer: Logitech
    [    3.522481] hidraw: raw HID events driver (C) Jiri Kosina
    [    3.552282] usbcore: registered new interface driver usbhid
    [    3.552290] usbhid: USB HID core driver
    [    3.556917] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:046D:C51B.0001/input/input3
    [    3.557248] hid-generic 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-2/input0
    [    3.561395] hid-generic 0003:046D:C51B.0002: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-2/input1
    [    4.060122] scsi 2:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9335 PQ: 0 ANSI: 0
    [    4.061072] sd 2:0:0:0: Attached scsi generic sg2 type 0
    [    4.070108] sd 2:0:0:0: [sdb] Attached SCSI removable disk
    [    4.546290] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [    5.300463] random: init: uninitialized urandom read (12 bytes read, 111 bits of entropy available)
    [    5.617387] random: nonblocking pool is initialized
    [    6.914754] Adding 2083836k swap on /dev/sda5.  Priority:-1 extents:1 across:2083836k FS
    [    7.689694] systemd-udevd[357]: starting version 204
    [    7.746975] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    [    8.329139] lp: driver loaded but no devices found
    [    8.400908] ppdev: user-space parallel port driver
    [    8.428146] parport_pc 00:07: reported by Plug and Play ACPI
    [    8.428292] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    [    8.520666] lp0: using parport0 (interrupt-driven).
    [   10.261128] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   10.483373] intel_rng: FWH not detected
    [   10.711582] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102F conflicts with OpRegion 0x0000000000001000-0x000000000000102F (\_SB_.PCI0.LPC0.PMIO) (20150930/utaddress-254)
    [   10.711600] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   10.711609] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011AF (\_SB_.PCI0.LPC0.GPOX) (20150930/utaddress-254)
    [   10.711619] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   10.716120] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [   10.802987] device-mapper: multipath: version 1.10.0 loaded
    [   10.872541] leds_ss4200: no LED devices found
    [   11.968255] Bluetooth: Core ver 2.21
    [   11.968372] NET: Registered protocol family 31
    [   11.968378] Bluetooth: HCI device and connection manager initialized
    [   11.968390] Bluetooth: HCI socket layer initialized
    [   11.968399] Bluetooth: L2CAP socket layer initialized
    [   11.968416] Bluetooth: SCO socket layer initialized
    [   12.213251] 8812au: loading out-of-tree module taints kernel.
    [   12.215128] 8812au: module verification failed: signature and/or required key missing - tainting kernel
    [   12.292905] usbcore: registered new interface driver btusb
    [   12.387112] gpio_ich: GPIO from 462 to 511 on gpio_ich
    [   12.420098] Bluetooth: hci0: BCM: chip id 63
    [   12.452104] Bluetooth: hci0: BCM20702A
    [   12.454100] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
    [   12.484916] usbcore: registered new interface driver rtl8812au
    [   12.674041] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e8.hcd failed with error -2
    [   12.674056] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e8.hcd not found
    [   13.031390] init: failsafe main process (546) killed by TERM signal
    [   14.041571] Bluetooth: RFCOMM TTY layer initialized
    [   14.041590] Bluetooth: RFCOMM socket layer initialized
    [   14.041609] Bluetooth: RFCOMM ver 1.11
    [   14.183779] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   14.183788] Bluetooth: BNEP filters: protocol multicast
    [   14.183799] Bluetooth: BNEP socket layer initialized
    [   15.256412] init: cups main process (691) killed by HUP signal
    [   15.256444] init: cups main process ended, respawning
    [   22.396670] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   23.062713] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   23.065421] RTL871X: indicate disassoc
    [   23.067046] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   23.433520] cfg80211: World regulatory domain updated:
    [   23.433529] cfg80211:  DFS Master region: unset
    [   23.433532] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    [   23.433537] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [   23.433541] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [   23.433544] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
    [   23.433548] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [   23.433551] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    [   24.278937] RTL871X: set bssid:00:00:00:00:00:00
    [   24.279064] RTL871X: set ssid [g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9a8\xffffffdc\xffffffda\xffffffc0L>6] fw_state=0x00000008
    [   24.585861] init: plymouth-upstart-bridge main process ended, respawning
    [   24.606783] init: plymouth-upstart-bridge main process (1112) terminated with status 1
    [   24.606828] init: plymouth-upstart-bridge main process ended, respawning
    [   25.165385] init: samba-ad-dc main process (1079) terminated with status 1
    [   31.020805] RTL871X: set ssid [BassPlayer] fw_state=0x00000008
    [   31.020846] RTL871X: set bssid:00:22:3f:9e:66:b8
    [   31.342707] RTL871X: start auth
    [   31.346804] RTL871X: auth success, start assoc
    [   31.351691] RTL871X: assoc success
    [   31.351820] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [   31.353677] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x000fffff
    [   31.353677] 	 ==> rssi_level:0, rate_bitmap:0x000ff015
    [   31.360623] RTL871X: send eapol packet
    [   31.367650] RTL871X: send eapol packet
    [   31.369544] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
    [   31.369554] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    [   31.371290] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:0
    [   31.373042] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    [   31.374790] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:0
    [   31.384304] RTL871X: sta recv deauth reason code(6) sta:00:22:3f:9e:66:b8
    [   31.399181] RTL871X: indicate disassoc
    [   31.425797] RTL871X: indicate disassoc
    [   31.427303] RTL871X: set ssid [BassPlayer] fw_state=0x00000008
    [   31.427333] RTL871X: set bssid:00:22:3f:9e:66:b8
    [   32.657589] init: plymouth-stop pre-start process (1547) terminated with status 1
    [   35.131227] RTL871X: start auth
    [   35.134440] RTL871X: auth success, start assoc
    [   35.139094] RTL871X: assoc success
    [   35.140677] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x000fffff
    [   35.140677] 	 ==> rssi_level:0, rate_bitmap:0x000ff015
    [   35.243674] RTL871X: indicate disassoc
    [   35.245556] RTL871X: set ssid [BassPlayer] fw_state=0x00000008
    [   35.245594] RTL871X: set bssid:00:22:3f:9e:66:b8
    [   35.540817] RTL871X: start auth
    [   35.545081] RTL871X: auth success, start assoc
    [   35.549732] RTL871X: assoc success
    [   35.553099] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x000fffff
    [   35.553099] 	 ==> rssi_level:0, rate_bitmap:0x000ff015
    [   35.574493] RTL871X: send eapol packet
    [   35.583622] RTL871X: send eapol packet
    [   35.592071] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
    [   35.592105] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    [   37.094551] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x000fffff
    [   37.094551] 	 ==> rssi_level:2, rate_bitmap:0x000ff000
    [  120.205715] RTL871X: send eapol packet
    [  120.205925] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    joseph@SurfersMintu1 ~ $

    Does this look to you like I have many multiples of the same drivers or even bogus copies, over and over?

    I am at a loss as to how to remove any code or apps as that hasn't been part of my training yet.

    I'm just happy to be able to get something INstalled.

    and is this a problem? ........

    Code:
    [   10.711619] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [   10.716120] lpc_ich: Resource conflict(s) found affecting gpio_ich


    Warum werden wir so früh alt und klug so spät?

  5. #5
    Smiling Down On Youse SurferJoe46's Avatar
    Join Date
    May 2005
    Location
    Hamilton, Montana, USA
    Posts
    14,317

    Default Re: RTL8812AU Is Still Bugging me!

    Then ---- this for sudo lshw :

    Code:
    joseph@SurfersMintu1 ~ $ sudo lshw
    [sudo] password for joseph: 
    surfersmintu1             
        description: Mini Tower Computer
        product: 811323U
        vendor: IBM
        version: ThinkCentre M52
        serial: LKXMP2F
        width: 64 bits
        capabilities: smbios-2.34 dmi-2.34 vsyscall32
        configuration: administrator_password=disabled boot=oem-specific chassis=mini-tower keyboard_password=enabled power-on_password=disabled uuid=7BACC2B1-B6EF-3108-91AF-1BBB15241C74
      *-core
           description: Motherboard
           product: IBM
           vendor: IBM
           physical id: 0
         *-firmware
              description: BIOS
              vendor: IBM
              physical id: 0
              version: 2EKT32AUS
              date: 12/16/2005
              size: 111KiB
              capacity: 704KiB
              capabilities: pci pnp upgrade shadowing escd cdboot edd acpi usb ls120boot smartbattery biosbootspecification
         *-cpu
              description: CPU
              product: Intel(R) Pentium(R) 4 CPU 3.00GHz
              vendor: Intel Corp.
              physical id: 4
              bus info: cpu@0
              version: Intel(R) Pentium(R) 4 CPU 3.00GHz
              slot: LGA775/PSC/TJS
              size: 3GHz
              capacity: 3800MHz
              width: 64 bits
              clock: 200MHz
              capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc pebs bts nopl pni dtes64 monitor ds_cpl cid cx16 xtpr retpoline kaiser
            *-cache:0
                 description: L1 cache
                 physical id: 5
                 slot: L1 Cache
                 size: 16KiB
                 capacity: 256KiB
                 capabilities: asynchronous internal write-back data
            *-cache:1
                 description: L2 cache
                 physical id: 6
                 slot: L2 Cache
                 size: 1MiB
                 capacity: 2MiB
                 capabilities: burst internal write-back
         *-memory
              description: System Memory
              physical id: 22
              slot: System board or motherboard
              size: 2GiB
            *-bank:0
                 description: DIMM DDR Synchronous 533 MHz (1.9 ns)
                 physical id: 0
                 slot: J9
                 size: 512MiB
                 width: 64 bits
                 clock: 533MHz (1.9ns)
            *-bank:1
                 description: DIMM DDR Synchronous 533 MHz (1.9 ns)
                 physical id: 1
                 slot: J10
                 size: 512MiB
                 width: 64 bits
                 clock: 533MHz (1.9ns)
            *-bank:2
                 description: DIMM DDR Synchronous 533 MHz (1.9 ns)
                 physical id: 2
                 slot: J3
                 size: 512MiB
                 width: 64 bits
                 clock: 533MHz (1.9ns)
            *-bank:3
                 description: DIMM DDR Synchronous 533 MHz (1.9 ns)
                 physical id: 3
                 slot: J4
                 size: 512MiB
                 width: 64 bits
                 clock: 533MHz (1.9ns)
         *-pci
              description: Host bridge
              product: 82945G/GZ/P/PL Memory Controller Hub
              vendor: Intel Corporation
              physical id: 100
              bus info: pci@0000:00:00.0
              version: 02
              width: 32 bits
              clock: 33MHz
              configuration: driver=agpgart-intel
              resources: irq:0
            *-display:0
                 description: VGA compatible controller
                 product: 82945G/GZ Integrated Graphics Controller
                 vendor: Intel Corporation
                 physical id: 2
                 bus info: pci@0000:00:02.0
                 version: 02
                 width: 32 bits
                 clock: 33MHz
                 capabilities: msi pm vga_controller bus_master cap_list rom
                 configuration: driver=i915 latency=0
                 resources: irq:16 memory:d0100000-d017ffff ioport:30c0(size=8) memory:c0000000-cfffffff memory:d0180000-d01bffff
            *-display:1 UNCLAIMED
                 description: Display controller
                 product: 82945G/GZ Integrated Graphics Controller
                 vendor: Intel Corporation
                 physical id: 2.1
                 bus info: pci@0000:00:02.1
                 version: 02
                 width: 32 bits
                 clock: 33MHz
                 capabilities: pm cap_list
                 configuration: latency=0
                 resources: memory:80600000-8067ffff
            *-pci:0
                 description: PCI bridge
                 product: NM10/ICH7 Family PCI Express Port 1
                 vendor: Intel Corporation
                 physical id: 1c
                 bus info: pci@0000:00:1c.0
                 version: 01
                 width: 32 bits
                 clock: 33MHz
                 capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
                 configuration: driver=pcieport
                 resources: irq:24 ioport:4000(size=4096) memory:d0000000-d00fffff ioport:80000000(size=2097152)
               *-network
                    description: Ethernet interface
                    product: 82573E Gigabit Ethernet Controller (Copper)
                    vendor: Intel Corporation
                    physical id: 0
                    bus info: pci@0000:02:00.0
                    logical name: eth0
                    version: 03
                    serial: 00:14:85:9f:6d:02
                    capacity: 1Gbit/s
                    width: 32 bits
                    clock: 33MHz
                    capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
                    configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k firmware=1.0-7 latency=0 link=no multicast=yes port=twisted pair
                    resources: irq:26 memory:d0080000-d009ffff memory:d0000000-d007ffff ioport:4000(size=32)
            *-pci:1
                 description: PCI bridge
                 product: NM10/ICH7 Family PCI Express Port 2
                 vendor: Intel Corporation
                 physical id: 1c.1
                 bus info: pci@0000:00:1c.1
                 version: 01
                 width: 32 bits
                 clock: 33MHz
                 capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
                 configuration: driver=pcieport
                 resources: irq:25 ioport:2000(size=4096) memory:80200000-803fffff ioport:80400000(size=2097152)
            *-usb:0
                 description: USB controller
                 product: NM10/ICH7 Family USB UHCI Controller #1
                 vendor: Intel Corporation
                 physical id: 1d
                 bus info: pci@0000:00:1d.0
                 version: 01
                 width: 32 bits
                 clock: 33MHz
                 capabilities: uhci bus_master
                 configuration: driver=uhci_hcd latency=0
                 resources: irq:23 ioport:3000(size=32)
            *-usb:1
                 description: USB controller
                 product: NM10/ICH7 Family USB UHCI Controller #2
                 vendor: Intel Corporation
                 physical id: 1d.1
                 bus info: pci@0000:00:1d.1
                 version: 01
                 width: 32 bits
                 clock: 33MHz
                 capabilities: uhci bus_master
                 configuration: driver=uhci_hcd latency=0
                 resources: irq:19 ioport:3020(size=32)
            *-usb:2
                 description: USB controller
                 product: NM10/ICH7 Family USB UHCI Controller #3
                 vendor: Intel Corporation
                 physical id: 1d.2
                 bus info: pci@0000:00:1d.2
                 version: 01
                 width: 32 bits
                 clock: 33MHz
                 capabilities: uhci bus_master
                 configuration: driver=uhci_hcd latency=0
                 resources: irq:18 ioport:3040(size=32)
            *-usb:3
                 description: USB controller
                 product: NM10/ICH7 Family USB UHCI Controller #4
                 vendor: Intel Corporation
                 physical id: 1d.3
                 bus info: pci@0000:00:1d.3
                 version: 01
                 width: 32 bits
                 clock: 33MHz
                 capabilities: uhci bus_master
                 configuration: driver=uhci_hcd latency=0
                 resources: irq:16 ioport:3060(size=32)
            *-usb:4
                 description: USB controller
                 product: NM10/ICH7 Family USB2 EHCI Controller
                 vendor: Intel Corporation
                 physical id: 1d.7
                 bus info: pci@0000:00:1d.7
                 version: 01
                 width: 32 bits
                 clock: 33MHz
                 capabilities: pm debug ehci bus_master cap_list
                 configuration: driver=ehci-pci latency=0
                 resources: irq:23 memory:d03c0000-d03c03ff
            *-pci:2
                 description: PCI bridge
                 product: 82801 PCI Bridge
                 vendor: Intel Corporation
                 physical id: 1e
                 bus info: pci@0000:00:1e.0
                 version: e1
                 width: 32 bits
                 clock: 33MHz
                 capabilities: pci subtractive_decode bus_master cap_list
                 resources: ioport:5000(size=4096)
               *-multimedia
                    description: Multimedia audio controller
                    product: CMI8738/CMI8768 PCI Audio
                    vendor: C-Media Electronics Inc
                    physical id: a
                    bus info: pci@0000:0a:0a.0
                    version: 10
                    width: 32 bits
                    clock: 33MHz
                    capabilities: pm bus_master cap_list
                    configuration: driver=snd_cmipci latency=32 maxlatency=24 mingnt=2
                    resources: irq:22 ioport:5000(size=256)
            *-isa
                 description: ISA bridge
                 product: 82801GB/GR (ICH7 Family) LPC Interface Bridge
                 vendor: Intel Corporation
                 physical id: 1f
                 bus info: pci@0000:00:1f.0
                 version: 01
                 width: 32 bits
                 clock: 33MHz
                 capabilities: isa bus_master cap_list
                 configuration: driver=lpc_ich latency=0
                 resources: irq:0
            *-ide
                 description: IDE interface
                 product: NM10/ICH7 Family SATA Controller [IDE mode]
                 vendor: Intel Corporation
                 physical id: 1f.2
                 bus info: pci@0000:00:1f.2
                 version: 01
                 width: 32 bits
                 clock: 66MHz
                 capabilities: ide pm bus_master cap_list
                 configuration: driver=ata_piix latency=0
                 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:30b0(size=16)
            *-serial UNCLAIMED
                 description: SMBus
                 product: NM10/ICH7 Family SMBus Controller
                 vendor: Intel Corporation
                 physical id: 1f.3
                 bus info: pci@0000:00:1f.3
                 version: 01
                 width: 32 bits
                 clock: 33MHz
                 configuration: latency=0
                 resources: ioport:3080(size=32)
         *-scsi:0
              physical id: 1
              logical name: scsi0
              capabilities: emulated
            *-disk
                 description: ATA Disk
                 product: WDC WD5000AAKB-0
                 vendor: Western Digital
                 physical id: 0.0.0
                 bus info: scsi@0:0.0.0
                 logical name: /dev/sda
                 version: 4E05
                 serial: WD-WCAT00264750
                 size: 465GiB (500GB)
                 capabilities: partitioned partitioned:dos
                 configuration: ansiversion=5 sectorsize=512 signature=000dd40a
               *-volume:0
                    description: EXT4 volume
                    vendor: Linux
                    physical id: 1
                    bus info: scsi@0:0.0.0,1
                    logical name: /dev/sda1
                    logical name: /
                    version: 1.0
                    serial: ff049e57-c8bd-480b-920b-0f574bbdf5a4
                    size: 463GiB
                    capacity: 463GiB
                    capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
                    configuration: created=2018-02-19 22:57:34 filesystem=ext4 lastmountpoint=/ modified=2018-05-06 15:00:04 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2018-05-06 15:00:04 state=mounted
               *-volume:1
                    description: Extended partition
                    physical id: 2
                    bus info: scsi@0:0.0.0,2
                    logical name: /dev/sda2
                    size: 2035MiB
                    capacity: 2035MiB
                    capabilities: primary extended partitioned partitioned:extended
                  *-logicalvolume
                       description: Linux swap / Solaris partition
                       physical id: 5
                       logical name: /dev/sda5
                       capacity: 2035MiB
                       capabilities: nofs
         *-scsi:1
              physical id: 2
              logical name: scsi1
              capabilities: emulated
            *-cdrom
                 description: DVD-RAM writer
                 product: iHAS324   A
                 vendor: ATAPI
                 physical id: 0.1.0
                 bus info: scsi@1:0.1.0
                 logical name: /dev/cdrom
                 logical name: /dev/sr0
                 version: BL1D
                 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
                 configuration: ansiversion=5 status=nodisc
         *-scsi:2
              physical id: 3
              bus info: usb@4:1.3
              logical name: scsi2
              capabilities: emulated scsi-host
              configuration: driver=usb-storage
            *-disk
                 description: SCSI Disk
                 product: STORAGE DEVICE
                 vendor: Generic
                 physical id: 0.0.0
                 bus info: scsi@2:0.0.0
                 logical name: /dev/sdb
                 version: 9335
                 capabilities: removable
                 configuration: sectorsize=512
               *-medium
                    physical id: 0
                    logical name: /dev/sdb
      *-network
           description: Wireless interface
           physical id: 1
           bus info: usb@1:3
           logical name: wlan0
           serial: 16:88:11:c3:74:68
           capabilities: ethernet physical wireless
           configuration: broadcast=yes driver=rtl8812au ip=192.168.1.10 multicast=yes wireless=IEEE 802.11bgn
    joseph@SurfersMintu1 ~ $


    Warum werden wir so früh alt und klug so spät?

  6. #6
    Senior Member
    Join Date
    Dec 2004
    Posts
    1,067

    Default Re: RTL8812AU Is Still Bugging me!

    Hey Joe,

    What you see in dmesg affects the kernel, what I posted in my dmesg is all the messages I get for my USB WiFi adaptor, your one is going crazy with cfg80211 and RTL871x. Basically it's just detection, says my link is down, then is up and that's it, no more spamming the kernel.

    This might mean you have too many drivers fighting for that one adaptor.

    Show me what insmod displays and we may need to blacklist some drivers, be better if we could remove them but I feel if you're not too far into Mint, that a reinstall would be better, start clean and do it properly from the start. This was the reason I bought an adaptor with that chipset to see how difficult it'd be, but it worked without any issues.

    In a previous post, I gave instructions on how to install the latest available drivers I could find but it means you need to have at least kernel 4.13 I think, although I got kernel 4.15 (latest available in Mint) working with those drivers fine.

    I also only use network manager, not wicd.

  7. #7
    Senior Member
    Join Date
    Dec 2004
    Posts
    1,067

    Default Re: RTL8812AU Is Still Bugging me!

    Here's that post

    Quote Originally Posted by Kame View Post
    I bought myself a rtl8812au WiFi adaptor, to see how easy it would be to install.

    From Mint, their repo version is outdated, so that wasn't a good start, but I built it from the latest driver version I found on github and it worked fine for kernel 4.15, which is the latest at this moment for Mint.

    The thing is you want to make sure you remove all old installs you may have done, so it won't conflict.

    So the latest version I found 5.2.20, my instructions to install are:

    git clone https://github.com/gordboy/rtl8812au.git
    sudo cp -r rtl8812au /usr/src/rtl8812au-5.2.20
    sudo dkms {add,build,install} -m rtl8812au -v 5.2.20

    You may want to reboot at this stage.

    I may package it but I don't want to maintain it, so rather not as it was really just to see how easy/difficult it would be to install.

  8. #8
    Senior Member
    Join Date
    Dec 2004
    Posts
    1,067

    Default Re: RTL8812AU Is Still Bugging me!

    I looked at your first dmesg properly this time.

    You will benefit if you use an 80wire 40pin EIDE ribbon cable for your hard drive/cd ROM.

    You had 2 wireless devices connected, your 8812au was first, then your 8711 which causes all those messages, I didn't see the rtl8812au get disconnected but it looks like it got knocked out the way then reappears, connecting on a different bus.

    That 8711 spams a lot, it is possible that these wireless adaptors can interfere with each other but I can't see anything obvious in dmesg as I would have expected to see them disconnect.

    Do you use NetworkManager? it will have it's own log to maybe suggest what the issue could have been with connecting.

    Normally I would stop NetworkManager, unload the driver, load the driver then start NetworkManager and see if I can get the logs for it, I know it has a helper script to produce logs, but I'll have to post those commands when I'm home.

    You may want to look at:

    cat /var/log/syslog

    Which may reveal some things dmesg hasn't reported.

    From your install, again different kernels showing, if you update anything kernel related, linux-headers, etc, you'll need to rebuild your drivers again.
    Last edited by Kame; 07-05-2018 at 11:42 PM.

  9. #9
    Smiling Down On Youse SurferJoe46's Avatar
    Join Date
    May 2005
    Location
    Hamilton, Montana, USA
    Posts
    14,317

    Default Re: RTL8812AU Is Still Bugging me!

    Hmmm.

    I'm interested in the kernels that keep getting (what?) replaced? renewed? repaired? by (whom?) 'The Repository' or some other Linux system that keeps me fresh and current?

    I know that the RTL8711 is my Alpha - and I guess it 'calls' out for a driver every time I have to use it to get online at all.

    I usually take the Alpha out of it's front USB port and just leave the WSKY in one of the rear ports once it's up and blinking - telling me that it's communicating with the etherweb.

    So - I can understand the plethora of drivers that are there for the USB adapters (both the Alpha and the WSKY) - but ultimately I want the WSKY to run the whole show without a wingman to 'help it along' at all.

    Funny is that it (WSKY) started up and ran 100% by itself this morning - first time too! - but I know that's a fluke and may not repeat tomorrow or the next time I reboot again.

    What - again - is the reason for all the kernel updates/changes? I don't want this instability every day or so.

    I get notices that I need an update or two - or three or more -- many times a week and I am one to follow orders, especially from my computer - so I just 'OK' everything it tells me to do.

    I guess that's wrong..... but let me run that command for you now:

    Code:
    joseph@SurfersMintu1 ~ $  cat /var/log/syslog
    May  7 09:29:42 SurfersMintu1 anacron[842]: Job `cron.daily' terminated
    May  7 09:29:42 SurfersMintu1 anacron[842]: Normal exit (1 job run)
    May  7 09:32:15 SurfersMintu1 wpa_supplicant[1138]: wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]
    May  7 09:32:15 SurfersMintu1 kernel: [  535.870829] RTL871X: send eapol packet
    May  7 09:32:15 SurfersMintu1 kernel: [  535.871137] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    May  7 09:42:15 SurfersMintu1 wpa_supplicant[1138]: wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]
    May  7 09:42:15 SurfersMintu1 kernel: [ 1135.652592] RTL871X: send eapol packet
    May  7 09:42:15 SurfersMintu1 kernel: [ 1135.652808] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    May  7 09:43:39 SurfersMintu1 kernel: [ 1220.301875] perf interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
    May  7 09:52:14 SurfersMintu1 kernel: [ 1735.601612] RTL871X: send eapol packet
    May  7 09:52:14 SurfersMintu1 kernel: [ 1735.602053] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    May  7 10:02:15 SurfersMintu1 kernel: [ 2335.656219] RTL871X: send eapol packet
    May  7 10:02:15 SurfersMintu1 kernel: [ 2335.656425] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    May  7 10:06:58 SurfersMintu1 kernel: [ 2618.918354] perf interrupt took too long (5002 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
    May  7 10:12:17 SurfersMintu1 kernel: [ 2938.501942] RTL871X: sta recv deauth reason code(2) sta:00:22:3f:9e:66:b8
    May  7 10:02:15 SurfersMintu1 wpa_supplicant[1138]: message repeated 2 times: [ wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]]
    May  7 10:12:17 SurfersMintu1 wpa_supplicant[1138]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:22:3f:9e:66:b8 reason=0
    May  7 10:12:17 SurfersMintu1 kernel: [ 2938.517935] RTL871X: indicate disassoc
    May  7 10:12:17 SurfersMintu1 NetworkManager[1063]: <info> (wlan0): supplicant interface state: completed -> disconnected
    May  7 10:12:18 SurfersMintu1 NetworkManager[1063]: <info> (wlan0): supplicant interface state: disconnected -> scanning
    May  7 10:12:21 SurfersMintu1 wpa_supplicant[1138]: wlan0: Trying to associate with 00:22:3f:9e:66:b8 (SSID='BassPlayer' freq=2412 MHz)
    May  7 10:12:21 SurfersMintu1 wpa_supplicant[1138]: wlan0: Association request to the driver failed
    May  7 10:12:21 SurfersMintu1 kernel: [ 2941.994240] RTL871X: set ssid [BassPlayer] fw_state=0x00000008
    May  7 10:12:21 SurfersMintu1 kernel: [ 2941.994279] RTL871X: set bssid:00:22:3f:9e:66:b8
    May  7 10:12:21 SurfersMintu1 NetworkManager[1063]: <info> (wlan0): supplicant interface state: scanning -> associating
    May  7 10:12:21 SurfersMintu1 NetworkManager[1063]: <info> (wlan0): roamed from BSSID 00:22:3F:9E:66:B8 (BassPlayer) to (none) ((none))
    May  7 10:12:21 SurfersMintu1 kernel: [ 2942.312322] RTL871X: start auth
    May  7 10:12:21 SurfersMintu1 kernel: [ 2942.317933] RTL871X: auth success, start assoc
    May  7 10:12:21 SurfersMintu1 wpa_supplicant[1138]: wlan0: Associated with 00:22:3f:9e:66:b8
    May  7 10:12:21 SurfersMintu1 kernel: [ 2942.322584] RTL871X: assoc success
    May  7 10:12:21 SurfersMintu1 kernel: [ 2942.324062] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x000fffff
    May  7 10:12:21 SurfersMintu1 kernel: [ 2942.324062] 	 ==> rssi_level:0, rate_bitmap:0x000ff015
    May  7 10:12:21 SurfersMintu1 NetworkManager[1063]: <info> (wlan0): supplicant interface state: associating -> associated
    May  7 10:12:21 SurfersMintu1 kernel: [ 2942.334405] RTL871X: send eapol packet
    May  7 10:12:21 SurfersMintu1 NetworkManager[1063]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
    May  7 10:12:21 SurfersMintu1 wpa_supplicant[1138]: wlan0: WPA: Key negotiation completed with 00:22:3f:9e:66:b8 [PTK=CCMP GTK=TKIP]
    May  7 10:12:21 SurfersMintu1 wpa_supplicant[1138]: wlan0: CTRL-EVENT-CONNECTED - Connection to 00:22:3f:9e:66:b8 completed [id=0 id_str=]
    May  7 10:12:21 SurfersMintu1 kernel: [ 2942.340312] RTL871X: send eapol packet
    May  7 10:12:21 SurfersMintu1 kernel: [ 2942.341903] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
    May  7 10:12:21 SurfersMintu1 kernel: [ 2942.341918] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    May  7 10:12:21 SurfersMintu1 NetworkManager[1063]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
    May  7 10:12:21 SurfersMintu1 NetworkManager[1063]: <info> (wlan0): roamed from BSSID (none) ((none)) to 00:22:3F:9E:66:B8 (BassPlayer)
    May  7 10:12:22 SurfersMintu1 kernel: [ 2942.758409] UpdateHalRAMask8812A => mac_id:0, networkType:0x0b, mask:0x000fffff
    May  7 10:12:22 SurfersMintu1 kernel: [ 2942.758409] 	 ==> rssi_level:2, rate_bitmap:0x000ff000
    May  7 10:17:01 SurfersMintu1 CRON[3550]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
    May  7 10:22:14 SurfersMintu1 wpa_supplicant[1138]: wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]
    May  7 10:22:14 SurfersMintu1 kernel: [ 3535.448306] RTL871X: send eapol packet
    May  7 10:22:14 SurfersMintu1 kernel: [ 3535.448341] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    May  7 10:32:14 SurfersMintu1 kernel: [ 4135.396328] RTL871X: send eapol packet
    May  7 10:32:14 SurfersMintu1 kernel: [ 4135.396667] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    May  7 10:42:14 SurfersMintu1 kernel: [ 4735.344963] RTL871X: send eapol packet
    May  7 10:42:14 SurfersMintu1 kernel: [ 4735.345346] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    May  7 10:52:14 SurfersMintu1 kernel: [ 5335.294186] RTL871X: send eapol packet
    May  7 10:52:14 SurfersMintu1 kernel: [ 5335.294445] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    May  7 11:02:14 SurfersMintu1 kernel: [ 5935.303345] RTL871X: send eapol packet
    May  7 11:02:14 SurfersMintu1 kernel: [ 5935.303733] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    May  7 11:12:14 SurfersMintu1 kernel: [ 6535.208960] RTL871X: send eapol packet
    May  7 11:12:14 SurfersMintu1 kernel: [ 6535.209284] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    May  7 11:12:14 SurfersMintu1 wpa_supplicant[1138]: message repeated 5 times: [ wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]]
    May  7 11:17:02 SurfersMintu1 CRON[4528]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
    May  7 11:22:14 SurfersMintu1 wpa_supplicant[1138]: wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]
    May  7 11:22:14 SurfersMintu1 kernel: [ 7135.140791] RTL871X: send eapol packet
    May  7 11:22:14 SurfersMintu1 kernel: [ 7135.141032] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    May  7 11:32:14 SurfersMintu1 kernel: [ 7735.091425] RTL871X: send eapol packet
    May  7 11:32:14 SurfersMintu1 kernel: [ 7735.091833] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    May  7 11:32:14 SurfersMintu1 wpa_supplicant[1138]: wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]
    May  7 11:42:14 SurfersMintu1 wpa_supplicant[1138]: wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]
    May  7 11:42:14 SurfersMintu1 kernel: [ 8335.038367] RTL871X: send eapol packet
    May  7 11:42:14 SurfersMintu1 kernel: [ 8335.038601] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    May  7 11:52:14 SurfersMintu1 kernel: [ 8934.987773] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    May  7 11:52:14 SurfersMintu1 kernel: [ 8934.987800] RTL871X: send eapol packet
    May  7 12:02:14 SurfersMintu1 kernel: [ 9534.954751] RTL871X: send eapol packet
    May  7 12:02:14 SurfersMintu1 kernel: [ 9534.954782] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    May  7 12:12:14 SurfersMintu1 kernel: [10134.907674] RTL871X: send eapol packet
    May  7 12:12:14 SurfersMintu1 kernel: [10134.907910] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    May  7 12:12:14 SurfersMintu1 wpa_supplicant[1138]: message repeated 3 times: [ wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]]
    May  7 12:17:02 SurfersMintu1 CRON[5682]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
    May  7 12:22:14 SurfersMintu1 wpa_supplicant[1138]: wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]
    May  7 12:22:14 SurfersMintu1 kernel: [10734.869063] RTL871X: send eapol packet
    May  7 12:22:14 SurfersMintu1 kernel: [10734.869288] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    May  7 12:32:14 SurfersMintu1 kernel: [11334.805871] RTL871X: send eapol packet
    May  7 12:32:14 SurfersMintu1 kernel: [11334.806153] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    May  7 12:42:14 SurfersMintu1 kernel: [11934.835957] RTL871X: send eapol packet
    May  7 12:42:14 SurfersMintu1 kernel: [11934.836027] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    May  7 12:52:14 SurfersMintu1 kernel: [12534.850374] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    May  7 12:52:14 SurfersMintu1 kernel: [12534.850412] RTL871X: send eapol packet
    May  7 13:02:14 SurfersMintu1 kernel: [13134.866292] RTL871X: send eapol packet
    May  7 13:02:14 SurfersMintu1 kernel: [13134.866323] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    May  7 13:12:14 SurfersMintu1 kernel: [13734.669814] RTL871X: send eapol packet
    May  7 13:12:14 SurfersMintu1 kernel: [13734.669864] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    May  7 13:12:14 SurfersMintu1 wpa_supplicant[1138]: message repeated 5 times: [ wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]]
    May  7 13:17:01 SurfersMintu1 CRON[6873]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
    May  7 13:22:14 SurfersMintu1 wpa_supplicant[1138]: wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]
    May  7 13:22:14 SurfersMintu1 kernel: [14334.659062] RTL871X: send eapol packet
    May  7 13:22:14 SurfersMintu1 kernel: [14334.659307] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    May  7 13:32:14 SurfersMintu1 kernel: [14934.708385] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:2
    May  7 13:32:14 SurfersMintu1 kernel: [14934.708429] RTL871X: send eapol packet
    May  7 13:32:14 SurfersMintu1 wpa_supplicant[1138]: wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]
    May  7 13:42:14 SurfersMintu1 wpa_supplicant[1138]: wlan0: WPA: Group rekeying completed with 00:22:3f:9e:66:b8 [GTK=TKIP]
    May  7 13:42:14 SurfersMintu1 kernel: [15534.622857] RTL871X: send eapol packet
    May  7 13:42:14 SurfersMintu1 kernel: [15534.623372] RTL871X: set group key to hw: alg:2(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
    joseph@SurfersMintu1 ~ $
    One of the things I want to fix is that when I put the WSKY in a rear USB port - and then I click on 'Shut Down" - I get a reboot like I lost power and it's restarting again.

    I have been to BIOS and unset and reset the "Do not restart after power failure" many times. I cannot get it to not be overridden.


    Warum werden wir so früh alt und klug so spät?

  10. #10
    Senior Member
    Join Date
    Dec 2004
    Posts
    1,067

    Default Re: RTL8812AU Is Still Bugging me!

    I recall only a security reason for the kernel, kernel 4.13 was to address the spectre/meltdown issue. Normally kernels will not be updated.

    But every time the kernel gets updated, you need to remove the old driver and build it again. if the driver source was created properly, you normally don't have to do this, the reason I don't make install and use dkms is for that reason, but I'll have to update my kernel to see if it works as intended.

Similar Threads

  1. IE11 browser is bugging me
    By linw in forum PressF1
    Replies: 14
    Last Post: 28-05-2014, 10:16 AM
  2. Replies: 4
    Last Post: 12-06-2005, 04:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •