Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Junior Member Chikara's Avatar
    Join Date
    Jul 2006
    Location
    Originally NZ, now in Singapore
    Posts
    481

    Default Why am I getting errors about Event 7000 in my Event Viewer log?

    Hi all,

    I've noticed when booting up, or restarting, often my computer shows a brief progress bar (dos-like) when it initially starts (before it ever gets to windows).

    Similar to the progress bar it shows when PC wasn't shut down properly last time and it does a HD scan before booting. The progress bar looks the same as that, but there's no message. It only takes a second or to complete.

    (By the way, the automatic reboot upon errors is turned off)

    So, I guessed maybe there was some error on shutdown or start-up that caused this, so I had a look in the event viewer.
    There are quite a few errors (going back many many months) that show Event 7000.
    If I double-click them, there area few different variations, all event 7000, but with different messages. At the end of this post, I've copied three different ones.

    Note that I am not actually getting any BSOD's, but it seems like something isn't right. I've tried Googling the errors, but there is sooo many different matches, each with different information, it's like I'm looking for a needle in a haystack.
    The MS help link for that error message wasn't very helpful - it just said to try: Verify the service password has not expired (huh?)
    Verify the service is in the correct location (how do I do that?)
    Verify the service is not infected with a virus (I've run a full virusscan, all clean)

    I've also ran scans on Malware bytes, and Super Antispyware, all good.
    So I don't really know where to go from here... Any suggestions on what to try next?

    Running Win XP Pro, SP3, fully patched.

    Thanks


    Log details - first one:

    Event Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7000
    Date: 24/05/2009
    Time: 8:51:45 p.m.
    User: N/A
    Computer: TONY
    Description:
    The IMAPI CD-Burning COM Service service failed to start due to the following error:
    The service did not respond to the start or control request in a timely fashion.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Here's another:

    Event Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7000
    Date: 24/05/2009
    Time: 8:50:48 p.m.
    User: N/A
    Computer: TONY
    Description:
    The Parallel port driver service failed to start due to the following error:
    The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.


    And another:

    Event Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7000
    Date: 24/05/2009
    Time: 8:50:48 p.m.
    User: N/A
    Computer: TONY
    Description:
    The OMSCAN service failed to start due to the following error:
    The system cannot find the file specified.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  2. #2
    Computer Technician wainuitech's Avatar
    Join Date
    Aug 2007
    Location
    Wellington
    Posts
    28,164

    Default Re: Why am I getting errors about Event 7000 in my Event Viewer log?

    Working backwards -- the OMSCAN can relate to HP Open Mail server.

    Click start/run type in msconfig under startup, locate it and untick, that should stop it from running on next reboot.

    The other two
    IMAPI CD-Burning COM Service service failed to start -- Parallel port driver service failed to start due
    both are ports / connections.

    Does the printer if its a parallel one, and optical drive still work ??

    What you may like to try is click start/run type in sfc /scannow ( note space between c /s) have your XP CD handy.

    If that doesn't work, right click My Computer properties/ hardware Tab/ Device manager, expand out the optical drive - right click it, uninstall -- reboot teh PC, it "should" automatically pick up the Optical drive again.

  3. #3
    Junior Member Chikara's Avatar
    Join Date
    Jul 2006
    Location
    Originally NZ, now in Singapore
    Posts
    481

    Default Re: Why am I getting errors about Event 7000 in my Event Viewer log?

    Thanks for the quick reply.

    There is nothing about HP Open mail server under startup. (There is hpztsb04.exe, but this is to do with my HP printer, so i'm guessing that one is okay to leave?)

    And, the printer is actually a USB printer (which works fine).

    Optical drive works fine too, I've got a CD reader and separate CD/DVD writer (both internal) and they seem fine..

    I'll try the sfc / scannow next...

  4. #4
    Junior Member Chikara's Avatar
    Join Date
    Jul 2006
    Location
    Originally NZ, now in Singapore
    Posts
    481

    Default Re: Why am I getting errors about Event 7000 in my Event Viewer log?

    Hmmm, Wainuitech I tried everything in your post. Sfc / scannow seemed to work okay (it didn't specifically tell me any messages, it just scanned and then closed, apart from having to click retry a few times).
    I then also uninstalled both optical drives, just in case, and then let Windows re-install them on next boot. It picked them both up again and reinstalled them - all good.

    Checked the event viewer after the boot, and there are still the same errors (at end of post below).

    Is there anything else I can try??

    Thanks

    Event Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7000
    Date: 24/05/2009
    Time: 11:36:17 p.m.
    User: N/A
    Computer: TONY
    Description:
    The OMSCAN service failed to start due to the following error:
    The system cannot find the file specified.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.


    *******

    Event Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7000
    Date: 24/05/2009
    Time: 11:36:17 p.m.
    User: N/A
    Computer: TONY
    Description:
    The Parallel port driver service failed to start due to the following error:
    The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  5. #5
    Madre Dios!!! beeswax34's Avatar
    Join Date
    Aug 2006
    Location
    Central Auckland
    Posts
    5,133

    Default Re: Why am I getting errors about Event 7000 in my Event Viewer log?

    All the technology and software in the universe is useless when the end user has the IQ of a sack of hammers.

  6. #6
    Computer Technician wainuitech's Avatar
    Join Date
    Aug 2007
    Location
    Wellington
    Posts
    28,164

    Default Re: Why am I getting errors about Event 7000 in my Event Viewer log?

    Okay -- I wouldn't go mucking about dumping reg keys ( yet) it makes it kind of awkward to put it back if its required.


    Reinstalling the Optical drive cured one of the errors--

    Try this -- go back into the device manager, this time look for Ports (COM & LPT) - expand it out, uninstall the Parallel port - right click ECP print Port LPT1 -- Uninstall, reboot, it should pick it back up again, and hopefully fix that problem.

    Next problem the OMSCAN service -- Lets see what it belongs to first-- click start/Control Panel/ Administrative tools / Services.

    Scroll down till you find OMSCAN double click it, and see what it belongs to, you can also look at the dependencies Tab, to see what will be affected. Close the services box.

    Next go into msconfig - Services Tab - (depending on what its running, you may want to tick the box " hide all MS services - these are sometimes needed, also thats the reason for looking before in the services as to what its to) Locate OMSCAN, untick it. Reboot.

    By disabling it in the services you can always turn it back onagain if something doesnt work - removing it from the Reg means the program it is relating to may need to be reinstalled. If something stops working you may need to re -enable it.
    Last edited by wainuitech; 25-05-2009 at 09:01 AM. Reason: Damn typos - wheres the spell check.

  7. #7
    Junior Member Chikara's Avatar
    Join Date
    Jul 2006
    Location
    Originally NZ, now in Singapore
    Posts
    481

    Default Re: Why am I getting errors about Event 7000 in my Event Viewer log?

    Hmmm...

    Under device manager, under ports, I don't have a LPT port. Only a Communications port (COM2). Should I try removing that instead?

    Also I went into Services as you've suggested, and there is nothing in there at all that specifically says OMSCAN. So I'm guessing the relevant service that uses it, might be under a different name perhaps? How would I know which one it is?

  8. #8
    Computer Technician wainuitech's Avatar
    Join Date
    Aug 2007
    Location
    Wellington
    Posts
    28,164

    Default Re: Why am I getting errors about Event 7000 in my Event Viewer log?

    Dont think it would help in removing the COM ports - the One its complaining about is the Parallel port which is the ECP.


    The Following is ASSUMING you do have a Parallel Printer port on the Motherboard:

    Try this -- Go into the control panel - Add hardware / keep clicking Next, it will scan the PC for new hardware - IF it finds the printer Pot it will install it, if Not, Select " yes I have already conencted the Hardware" -Next - Scroll down, Locate ECP printer Port (LPT1) -- Follow the Prompts.

    The OMSCAN - in services, Did you look in the services Tab under MSCONFIG ? If not go in there and untick it - it should be there.

    Somewhere its being told to run but isn't there.

  9. #9
    Junior Member Chikara's Avatar
    Join Date
    Jul 2006
    Location
    Originally NZ, now in Singapore
    Posts
    481

    Default Re: Why am I getting errors about Event 7000 in my Event Viewer log?

    Yep there is a parallel port on the MB.. the MB is old, it's a Asus A7V266.
    I tried the adding new hardware option, it didn't pick up anything automatically. So I selected the option 'yes I have already connected the hardware, but there is no option for a printer port LPT1.
    There is an option for 'Creative Game port' though, would this somehow be making use of the parallel port??

    And yep I had a look both at the Services option through admin tools, and the services tab under MSCONFIG. There's definitely nothing that specifically says OMSCAN under either. It must be under a different name?
    Here is a copy and paste of the services details. Sorry the formatting is all screwed up

    Name Description Status Startup Type Log On As
    .NET Runtime Optimization Service v2.0.50727_X86 Microsoft .NET Framework NGEN Manual Local System
    Adobe LM Service AdobeLM Service Manual Local System
    Alerter Notifies selected users and computers of administrative alerts. If the service is stopped, programs that use administrative alerts will not receive them. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Local Service
    Apple Mobile Device Provides the interface to Apple mobile devices. Started Automatic Local System
    Application Layer Gateway Service Provides support for 3rd party protocol plug-ins for Internet Connection Sharing and the Windows Firewall. Started Manual Local Service
    Application Management Provides software installation services such as Assign, Publish, and Remove. Manual Local System
    ASP.NET State Service Provides support for out-of-process session states for ASP.NET. If this service is stopped, out-of-process requests will not be processed. If this service is disabled, any services that explicitly depend on it will fail to start. Manual Network Service
    Automatic Updates Enables the download and installation of Windows updates. If this service is disabled, this computer will not be able to use the Automatic Updates feature or the Windows Update Web site. Started Automatic Local System
    Avira AntiVir Guard Offers permanent protection against viruses and malware with the AntiVir search engine. Started Automatic Local System
    Avira AntiVir Scheduler Service to schedule Avira AntiVir Personal - Free Antivirus jobs and updates. Started Automatic Local System
    Background Intelligent Transfer Service Transfers files in the background using idle network bandwidth. If the service is stopped, features such as Windows Update, and MSN Explorer will be unable to automatically download programs and other information. If this service is disabled, any services that explicitly depend on it may fail to transfer files if they do not have a fail safe mechanism to transfer files directly through IE in case BITS has been disabled. Manual Local System
    Bonjour Service Bonjour allows applications like iTunes and Safari to advertise and discover services on the local network. Having Bonjour running enables you to connect to hardware devices like Apple TV and software services like iTunes sharing and AirTunes. If you disable Bonjour, any network service that explicitly depends on it will fail to start. Started Automatic Local System
    ClipBook Enables ClipBook Viewer to store information and share it with remote computers. If the service is stopped, ClipBook Viewer will not be able to share information with remote computers. If this service is disabled, any services that explicitly depend on it will fail to start. Disabled Local System
    COM+ Event System Supports System Event Notification Service (SENS), which provides automatic distribution of events to subscribing Component Object Model (COM) components. If the service is stopped, SENS will close and will not be able to provide logon and logoff notifications. If this service is disabled, any services that explicitly depend on it will fail to start. Started Manual Local System
    COM+ System Application Manages the configuration and tracking of Component Object Model (COM)+-based components. If the service is stopped, most COM+-based components will not function properly. If this service is disabled, any services that explicitly depend on it will fail to start. Manual Local System
    COMODO Internet Security Helper Service COMODO Internet Security Helper Service Started Automatic Local System
    Computer Browser Maintains an updated list of computers on the network and supplies this list to computers designated as browsers. If this service is stopped, this list will not be updated or maintained. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Local System
    Creative Service for CDROM Access Disabled Local System
    Cryptographic Services Provides three management services: Catalog Database Service, which confirms the signatures of Windows files; Protected Root Service, which adds and removes Trusted Root Certification Authority certificates from this computer; and Key Service, which helps enroll this computer for certificates. If this service is stopped, these management services will not function properly. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Local System
    DCOM Server Process Launcher Provides launch functionality for DCOM services. Started Automatic Local System
    DHCP Client Manages network configuration by registering and updating IP addresses and DNS names. Started Automatic Local System
    Distributed Link Tracking Client Maintains links between NTFS files within a computer or across computers in a network domain. Started Automatic Local System
    Distributed Transaction Coordinator Coordinates transactions that span multiple resource managers, such as databases, message queues, and file systems. If this service is stopped, these transactions will not occur. If this service is disabled, any services that explicitly depend on it will fail to start. Manual Network Service
    DNS Client Resolves and caches Domain Name System (DNS) names for this computer. If this service is stopped, this computer will not be able to resolve DNS names and locate Active Directory domain controllers. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Network Service
    Error Reporting Service Allows error reporting for services and applictions running in non-standard environments. Started Automatic Local System
    Event Log Enables event log messages issued by Windows-based programs and components to be viewed in Event Viewer. This service cannot be stopped. Started Automatic Local System
    Extensible Authentication Protocol Service Provides windows clients Extensible Authentication Protocol Service Manual Local System
    Fast User Switching Compatibility Provides management for applications that require assistance in a multiple user environment. Manual Local System
    FLEXnet Licensing Service This service performs licensing functions on behalf of FLEXnet enabled products. Manual Local System
    Google Desktop Manager 5.8.809.23506 Updates Google Desktop with the latest security fixes, enhancements and features. This service only runs occasionally and thus does not affect your computer's performance. If this service is stopped or disabled, Google Desktop may not function correctly. Manual Local System
    Google Software Updater Google Updater keeps your Google software up to date. If Google Updater Service is disabled or stopped, your Google software will not be kept up to date, meaning security vulnerabilities that may arise cannot be fixed and features may not work. Manual Local System
    Health Key and Certificate Management Service Manages health certificates and keys (used by NAP) Manual Local System
    Help and Support Enables Help and Support Center to run on this computer. If this service is stopped, Help and Support Center will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Local System
    HTTP SSL This service implements the secure hypertext transfer protocol (HTTPS) for the HTTP service, using the Secure Socket Layer (SSL). If this service is disabled, any services that explicitly depend on it will fail to start. Manual Local System
    Human Interface Device Access Enables generic input access to Human Interface Devices (HID), which activates and maintains the use of predefined hot buttons on keyboards, remote controls, and other multimedia devices. If this service is stopped, hot buttons controlled by this service will no longer function. If this service is disabled, any services that explicitly depend on it will fail to start. Disabled Local System
    IMAPI CD-Burning COM Service Manages CD recording using Image Mastering Applications Programming Interface (IMAPI). If this service is stopped, this computer will be unable to record CDs. If this service is disabled, any services that explicitly depend on it will fail to start. Manual Local System
    Indexing Service Indexes contents and properties of files on local and remote computers; provides rapid access to files through flexible querying language. Disabled Local System
    Infrared Monitor Supports infrared devices installed on the computer and detects other devices that are in range. Started Automatic Local System
    InstallDriver Table Manager Provides support for the Running Object Table for InstallShield Drivers Manual Local System
    InteractiveLogon Allows the Super-Fast User Switcher to log in a user Started Automatic Local System
    iPod Service iPod hardware management services Started Manual Local System
    IPSEC Services Manages IP security policy and starts the ISAKMP/Oakley (IKE) and the IP security driver. Started Automatic Local System
    Java Quick Starter Prefetches JRE files for faster startup of Java applets and applications Started Automatic Local System
    Logical Disk Manager Detects and monitors new hard disk drives and sends disk volume information to Logical Disk Manager Administrative Service for configuration. If this service is stopped, dynamic disk status and configuration information may become out of date. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Local System
    Logical Disk Manager Administrative Service Configures hard disk drives and volumes. The service only runs for configuration processes and then stops. Manual Local System
    Macromedia Licensing Service Provides authentication services for Macromedia applications. Manual Local System
    MaxSyncService Maxtor Syncronization Service Started Automatic Local System
    Messenger Transmits net send and Alerter service messages between clients and servers. This service is not related to Windows Messenger. If this service is stopped, Alerter messages will not be transmitted. If this service is disabled, any services that explicitly depend on it will fail to start. Disabled Local System
    Microsoft Office Diagnostics Service Run portions of Microsoft Office Diagnostics. Manual Local System
    MS Software Shadow Copy Provider Manages software-based volume shadow copies taken by the Volume Shadow Copy service. If this service is stopped, software-based volume shadow copies cannot be managed. If this service is disabled, any services that explicitly depend on it will fail to start. Manual Local System
    Net Logon Supports pass-through authentication of account logon events for computers in a domain. Manual Local System
    Net.Tcp Port Sharing Service Provides ability to share TCP ports over the net.tcp protocol. Disabled Local Service
    NetMeeting Remote Desktop Sharing Enables an authorized user to access this computer remotely by using NetMeeting over a corporate intranet. If this service is stopped, remote desktop sharing will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. Manual Local System
    Network Access Protection Agent Allows windows clients to participate in Network Access Protection Manual Local System
    Network Connections Manages objects in the Network and Dial-Up Connections folder, in which you can view both local area network and remote connections. Started Manual Local System
    Network DDE Provides network transport and security for Dynamic Data Exchange (DDE) for programs running on the same computer or on different computers. If this service is stopped, DDE transport and security will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. Disabled Local System
    Network DDE DSDM Manages Dynamic Data Exchange (DDE) network shares. If this service is stopped, DDE network shares will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. Disabled Local System
    Network Location Awareness (NLA) Collects and stores network configuration and location information, and notifies applications when this information changes. Started Manual Local System
    Network Provisioning Service Manages XML configuration files on a domain basis for automatic network provisioning. Manual Local System
    NT LM Security Support Provider Provides security to remote procedure call (RPC) programs that use transports other than named pipes. Manual Local System
    NVIDIA Display Driver Service Provides system and desktop level support to the NVIDIA display driver Started Automatic Local System
    Office Source Engine Saves installation files used for updates and repairs and is required for the downloading of Setup updates and Watson error reports. Manual Local System
    Performance Logs and Alerts Collects performance data from local or remote computers based on preconfigured schedule parameters, then writes the data to a log or triggers an alert. If this service is stopped, performance information will not be collected. If this service is disabled, any services that explicitly depend on it will fail to start. Manual Network Service
    Plug and Play Enables a computer to recognize and adapt to hardware changes with little or no user input. Stopping or disabling this service will result in system instability. Started Automatic Local System
    Portable Media Serial Number Service Retrieves the serial number of any portable media player connected to this computer. If this service is stopped, protected content might not be down loaded to the device. Manual Local System
    Print Spooler Loads files to memory for later printing. Started Automatic Local System
    Protected Storage Provides protected storage for sensitive data, such as private keys, to prevent access by unauthorized services, processes, or users. Started Automatic Local System
    QoS RSVP Provides network signaling and local traffic control setup functionality for QoS-aware programs and control applets. Manual Local System
    Remote Access Auto Connection Manager Creates a connection to a remote network whenever a program references a remote DNS or NetBIOS name or address. Manual Local System
    Remote Access Connection Manager Creates a network connection. Started Manual Local System
    Remote Desktop Help Session Manager Manages and controls Remote Assistance. If this service is stopped, Remote Assistance will be unavailable. Before stopping this service, see the Dependencies tab of the Properties dialog box. Manual Local System
    Remote Procedure Call (RPC) Provides the endpoint mapper and other miscellaneous RPC services. Started Automatic Network Service
    Remote Procedure Call (RPC) Locator Manages the RPC name service database. Manual Network Service
    Remote Registry Enables remote users to modify registry settings on this computer. If this service is stopped, the registry can be modified only by users on this computer. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Local Service
    Removable Storage Manual Local System
    Retrospect Express HD Helper Helps Retrospect with various tasks. Automatic Local System
    Retrospect Express HD Launcher Helps Retrospect Express HD run backup or duplicate on schedule. Started Automatic Local System
    Routing and Remote Access Offers routing services to businesses in local area and wide area network environments. Disabled Local System
    Seagate Sync Service Seagate Sync Service for Hardware Detection Disabled Local System
    Secondary Logon Enables starting processes under alternate credentials. If this service is stopped, this type of logon access will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Local System
    Security Accounts Manager Stores security information for local user accounts. Started Automatic Local System
    Security Center Monitors system security settings and configurations. Started Automatic Local System
    Server Supports file, print, and named-pipe sharing over the network for this computer. If this service is stopped, these functions will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Local System
    Shell Hardware Detection Started Automatic Local System
    Smart Card Manages access to smart cards read by this computer. If this service is stopped, this computer will be unable to read smart cards. If this service is disabled, any services that explicitly depend on it will fail to start. Manual Local Service
    Spyware Terminator Realtime Shield Service Started Automatic Local System
    SSDP Discovery Service Enables discovery of UPnP devices on your home network. Started Manual Local Service
    System Event Notification Tracks system events such as Windows logon, network, and power events. Notifies COM+ Event System subscribers of these events. Started Automatic Local System
    System Restore Service Performs system restore functions. To stop service, turn off System Restore from the System Restore tab in My Computer->Properties Started Automatic Local System
    Task Scheduler Enables a user to configure and schedule automated tasks on this computer. If this service is stopped, these tasks will not be run at their scheduled times. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Local System
    TCP/IP NetBIOS Helper Enables support for NetBIOS over TCP/IP (NetBT) service and NetBIOS name resolution. Started Automatic Local Service
    Telephony Provides Telephony API (TAPI) support for programs that control telephony devices and IP based voice connections on the local computer and, through the LAN, on servers that are also running the service. Started Manual Local System
    Telnet Enables a remote user to log on to this computer and run programs, and supports various TCP/IP Telnet clients, including UNIX-based and Windows-based computers. If this service is stopped, remote user access to programs might be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. Manual Local System
    Terminal Services Allows multiple users to be connected interactively to a machine as well as the display of desktops and applications to remote computers. The underpinning of Remote Desktop (including RD for Administrators), Fast User Switching, Remote Assistance, and Terminal Server. Started Manual Local System
    Themes Provides user experience theme management. Started Automatic Local System
    Uninterruptible Power Supply Manages an uninterruptible power supply (UPS) connected to the computer. Manual Local System
    Universal Plug and Play Device Host Provides support to host Universal Plug and Play devices. Manual Local Service
    Volume Shadow Copy Manages and implements Volume Shadow Copies used for backup and other purposes. If this service is stopped, shadow copies will be unavailable for backup and the backup may fail. If this service is disabled, any services that explicitly depend on it will fail to start. Manual Local System
    WebClient Enables Windows-based programs to create, access, and modify Internet-based files. If this service is stopped, these functions will not be available. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Local Service
    Windows Audio Manages audio devices for Windows-based programs. If this service is stopped, audio devices and effects will not function properly. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Local System
    Windows CardSpace Securely enables the creation, management, and disclosure of digital identities. Manual Local System
    Windows Driver Foundation - User-mode Driver Framework Manages user-mode driver host processes Manual Local System
    Windows Firewall/Internet Connection Sharing (ICS) Provides network address translation, addressing, name resolution and/or intrusion prevention services for a home or small office network. Started Automatic Local System
    Windows Image Acquisition (WIA) Provides image acquisition services for scanners and cameras. Started Automatic Local System
    Windows Installer Adds, modifies, and removes applications provided as a Windows Installer (*.msi) package. If this service is disabled, any services that explicitly depend on it will fail to start. Manual Local System
    Windows Management Instrumentation Provides a common interface and object model to access management information about operating system, devices, applications and services. If this service is stopped, most Windows-based software will not function properly. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Local System
    Windows Management Instrumentation Driver Extensions Provides systems management information to and from drivers. Manual Local System
    Windows Media Player Network Sharing Service Shares Windows Media Player libraries to other networked players and media devices using Universal Plug and Play Manual Network Service
    Windows Presentation Foundation Font Cache 3.0.0.0 Optimizes performance of Windows Presentation Foundation (WPF) applications by caching commonly used font data. WPF applications will start this service if it is not already running. It can be disabled, though doing so will degrade the performance of WPF applications. Manual Local Service
    Windows Search Provides content indexing and property caching for file, email and other content (via extensibility APIs). The service responds to file and email notifications to index modified content. If the service is stopped or disabled, the Explorer will not be able to display virtual folder views of items, and search in the Explorer will fall back to item-by-item slow search. Started Automatic Local System
    Windows Time Maintains date and time synchronization on all clients and servers in the network. If this service is stopped, date and time synchronization will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start.
    Started Automatic Local System
    Wired AutoConfig This service performs IEEE 802.1X authentication on Ethernet interfaces Manual Local System
    Wireless Zero Configuration Provides automatic configuration for the 802.11 adapters Started Automatic Local System
    WMDM PMSP Service Started Automatic Local System
    WMI Performance Adapter Provides performance library information from WMI HiPerf providers. Manual Local System
    Workstation Creates and maintains client network connections to remote servers. If this service is stopped, these connections will be unavailable. If this service is disabled, any services that explicitly depend on it will fail to start. Started Automatic Local System

  10. #10
    Computer Technician wainuitech's Avatar
    Join Date
    Aug 2007
    Location
    Wellington
    Posts
    28,164

    Default Re: Why am I getting errors about Event 7000 in my Event Viewer log?

    Okay time to get down and dirty Check on something:

    DONT touch anything else - Playing with the reg CAn cause all sorts of problems .

    1 Problem at a time - the Port -- Is the Printer port enabled in the BIOS ?

    If So, click start/run type in regedit navigate

    HKLM\System\Current ControlSet\Services\ParPort branch, set it's startup type to 4. (if its not already set to 4, if it is -exit out)

Similar Threads

  1. Event Viewer Errors
    By aidanmaz in forum PressF1
    Replies: 3
    Last Post: 27-01-2009, 04:01 PM
  2. Disk errors in event viewer
    By aidanmaz in forum PressF1
    Replies: 11
    Last Post: 13-05-2008, 06:06 PM
  3. Event Viewer Errors - How to Resolve
    By kahawai chaser in forum PressF1
    Replies: 4
    Last Post: 12-04-2008, 06:00 PM
  4. NT4 Event Viewer Messages
    By in forum PressF1
    Replies: 2
    Last Post: 28-07-2005, 06:20 PM
  5. Event viewer Warning
    By 00falcon in forum PressF1
    Replies: 0
    Last Post: 11-03-2004, 04:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •