PDA

View Full Version : Does anybody know a way to run something



Adamnz
04-10-2007, 11:50 PM
thats got a molex power connector off a laptop? specifically this - http://www.overclockers.co.nz/product/casemod/badge/el.shtml

Speedy Gonzales
05-10-2007, 07:43 AM
You'll be lucky

wratterus
05-10-2007, 08:04 AM
Hmmmm. Thats a tough one. You can get 240v to molex things, perhaps have a look for USB to molex? I'm guessing that thing won't use too much power? Could be worth a shot.

wainuitech
05-10-2007, 08:49 AM
Have a look at this Here shows how (http://www.xoxideforums.com/electronics-wiring/48696-tutorial-how-make-molex.html) You will have to make it yourself.

If you do be damn careful, Do it wrong and you could blow up something.

Adamnz
05-10-2007, 12:02 PM
thanks for help and links. Just wandering, i was poking around with the multi meter and found some pins that output 14v, would that kill the case badge?

Adamnz
05-10-2007, 12:08 PM
oops I just realized that usb - molex wont work :( , usb only provides 5v and judging from the picture of the badge its got a yellow and a black wire - 12v