PDA

View Full Version : IRQ Conflicts help please



10-12-1998, 12:10 AM
I recent run SiFoft Sandra and it reported IRQ conflicts (see report below.)

The PCI Holder seems to be using both IRQ 9 and 10

I don't seem to have any problems but would like to try to resolve them - any help would be appreciated

***** SiSoft Sandra Standard for Windows Version 98.7.4.10 *****
-----------------------------------------------------------------------------------------------
Private use ONLY. Business, office, commercial use or commercial exploitation in any way of
this version is strictly PROHIBITED!
To find out about the advanced versions check out the documentation.
-----------------------------------------------------------------------------------------------
Standard Version Licence to Cameron Gay at Private
System-Run ID: 1235-32564
Report done on 27 October, 1998 at 20:44:07
-----------------------------------------------------------------------------------------------

<<< Comments >>>
-----------------------------------------------------------------------------------------------
IRQ problems

<<< Memory Benchmark >>>
-----------------------------------------------------------------------------------------------

< Benchmark Results >
Current Memory System: Overall 64
PII400, iBX, 128M SDRAM, 512K SY: Overall 224
P200MMX, iTX, 64M SDRAM, 512K PB: Overall 105
P133, iVX, 32M EDO, 512K PB: Overall 80
P75, iFX, 16M EDO, 256K PB: Overall 50

< Benchmark Results Breakdown >
Memory Index: 64MB/s
Assignment: 66MB/s
Scaling: 61MB/s
Addition: 65MB/s
Triad: 63MB/s

< Memory Statistics >
Total Physical Memory: 32MB
Size of Array Used: 699051
Double Float Size: 64-bit

<<< Hardware IRQ Settings >>>
-----------------------------------------------------------------------------------------------

0: System timer
1: Standard 101/102-Key or Microsoft Natural Keyboard
2: Programmable interrupt controller
3: Communications Port (COM2)
4: Communications Port (COM1)
5: YAMAHA OPL3-SAx Sound System
6: Standard Floppy Disk Controller
7: Printer Port (LPT1)
8: System CMOS/real time clock
9: IRQ Holder for PCI Steering
9: S3 ViRGE PCI
10: Intel 82371AB PCI to USB Universal Host controller
Device St:Problem 00000008h
10: IRQ Holder for PCI Steering
11: YAMAHA OPL3-SAx IDE
12: PS/2 Compatible Mouse Port
13: Numeric data processor
14: Intel 82371AB PCI Bus Master IDE Controller
14: Primary IDE controller (dual fifo)
15: Intel 82371AB PCI Bus Master IDE Controller
15: Secondary IDE controller (dual fifo)

-----------------------------------------------------------------------------------------------
***** End of Report - Report created successfully *****