PDA

View Full Version : Interesting Mobo



Xika
13-06-2005, 06:29 PM
I have a Full Yes Industrial 82430VX. After searching for a manual of this Mobo, which I nor the Web has, i had to settle for a page (http://www.elhvb.com/mboards/fullyes/82430VX.html) which explained the boards jumper settings. The Processor the board has on it now is a Pentium 133, but alongside the Socket 7 socket is a Slot 1 slot. The page on jumpers does nothing to explain any jumper settings for Slot 1. Would this Mobo be able to handle all Slot 1 speeds?

pctek
13-06-2005, 06:42 PM
I'd say it applies regardless. Are you really sure you want to bother though? Getting on a bit...

Xika
13-06-2005, 06:52 PM
Yeah, I'm trying to use it for Half-life 1 lans, it already plays, at 10fps, in a window sized 400x300 in 640x480 resolution.
A little performance boost can't hurt.
The CPUs already overclocked to 180Mhz, 3x60Mhz, and it has 48megs of ram.
Or should I just consider a cheap P166 MMX off trademe?

btw Slot 1 CPUs aren't too expensive on trademe.

Xika
13-06-2005, 07:00 PM
Might I mention that the RAM can go up to 128MB but over 64MB, as i've read about Intel's 82430VX chipset, it slows down for a reason I can't remember.
The mobo has 4 72pin SIMM slots and an SDRAM slot (I think)