PDA

View Full Version : XP clock settings



Robsa
04-06-2004, 02:59 PM
Hey,
Fairly straight forward one Id imagine.......

Only just recently, my clock settings have been going hay wire, in that the PC seems to never be displaying the correct time. I have the correct GMT settings, and internet time synchronization enabled.

Its been suggested that it could just be the battery on the m/b But Im not so sure, as the computer is less than 2 years old.
Virus scans have not shown anything - nor have spybot etc.

Does anyone have any other ideas

Capt.Hook
04-06-2004, 03:25 PM
I'd go with the battery needing replacing.

Woody
04-06-2004, 03:31 PM
Like Capt Hook, I'd go for the battery.
I had to replace one in my machine - 18 mths old.
Must be a very low useful threshold - the new battery measured 3.26v while the old one still read 3.02v.
New battery - no prob's

Fire-and-Ice
04-06-2004, 05:01 PM
Yep, my money is on the battery as well. ;-)

Its cheap enough to find out anyway - less than $5 from the supermarket. Check out the existing one to see which type and number you require first though as they all look the same on the display. ;-)

robsonde
04-06-2004, 05:15 PM
i would go with the battery too.

99% of them are CR2032 batteries but it pay to check yours.

Robsa
04-06-2004, 06:03 PM
Cheers Guys,

AS I thought - will go with new batt.

thanks

aronking
04-06-2004, 06:07 PM
I would go with the battery solution as well.. Mind you I have a battle axe that is 7 years old and the battery is still going..

and it is not even Everyready!!!

Cheers (now this is something to drink to..

Jester
04-06-2004, 06:09 PM
Tell ya what .... go for the battery as the problem .... ;)

R2x1
04-06-2004, 08:27 PM
Och, could ye no gie it a wee burst on the charger firrrst? McBatteries cost poonds, ye ken