PDA

View Full Version : Getting the case off an IBM 300GL Personal Computer?!



Chilling_Silence
30-04-2004, 01:17 PM
Stupid question I know...

Perhaps today's just not my day (Either that or Ive been playing with the ReactOS Shell for too long :p), but basically I cant get the case off an IBM Personal Computer 300GL.

Any ideas?

There dont appear to be any screws :-(


Chill.

Terry Porritt
30-04-2004, 01:30 PM
If it's the mini-tower version with 2x 5 1/4" bays, there are 3 obvious thumb screws at the back :)

Maybe yours is different, hence no obvious screws.

metla
30-04-2004, 01:33 PM
Look for metal tabs on the underside,or screws behind the plastic moulded front(which itself probally just clips off)

robsonde
30-04-2004, 01:35 PM
if i remember right you will find that the top of the case slides foward about an inch and then the case lifts up.

there should be one or more screws on the back of the system.

good luck

Chilling_Silence
30-04-2004, 01:39 PM
Bingo!

Thanks Rob, right on :-)

There was one screw which I had mistaken for holding the PSU in place.. It was only preventing me from removing that case :8}

Thanks


Chill.