PDA

View Full Version : Locking up etc



Nodrog
23-02-2004, 12:35 PM
Wow, everything happening at the moment. Some unexpected things occuring, have been having some error messages as below,

The following came back after I submitted an error report:

Analysis Information

Thank you for submitting an error report.

Windows was temporarily unable to read your hard disk drive. It is unlikely that this error will repeat itself. However, if this is a recurring problem, Microsoft recommends that you contact the manufacturer that sold you your hard disk drive.


Manifest
Server=watson.microsoft.com
UI LCID=1033
Flags=123152
Brand=WINDOWS
TitleName=Microsoft Windows
DigPidRegPath=HKLM\Software\Microsoft\Windows NT\CurrentVersion\DigitalProductId
RegSubPath=Microsoft\PCHealth\ErrorReporting\DW
ErrorText=A log of this error has been created.
HeaderText=The system has recovered from a serious error.
Stage2URL=
Stage2URL=/dw/bluetwo.asp?BCCode=77&BCP1=C000000E&BCP2=C000000E&BCP3=00000000&BCP4=005F7000&OSVer=5_1_2600&SP=1_0&Product=256_1
DataFiles=C:\WINDOWS\Minidump\Mini022304-01.dmp|C:\DOCUME~1\gdevaroa\LOCALS~1\Temp\WER2.tmp .dir00\sysdata.xml
ErrorSubPath=blue

ERROR SIGNATURE
BCCode: 77 BCP1:C000000E BCP2:C000000E BCP3:0000000 BCP4:005f7000 Osver:5_1_2600 SP:1.0 Product:256_1


My OS is XP Prof
I have a new 80Gb Seagate with a 1yr old 40Gb Seagate as slave, recently installed a BTC Combo DVD/CD-RW. The combo installed as expected also Nero 6.0.0.24 (as per the disc label). Couple of days down the track here and it's having trouble reading, sometimes won't read. Sometimes identified as CD drive only, sometimes DVD/CD-RW.

Could I have a virus or is more likely to be a h'ware fault?

metla
23-02-2004, 01:00 PM
Check your connections(ide,power)

Make sure the items are all fitted securely.

Is your psu up to the job?

drcspy
23-02-2004, 07:57 PM
goto seagate and download their free drive diagnostic prog 'seatools' if I recall correctly it'll create a boot floppy to diagnose the drive(s) .......and report on their health......

do you have S.M.A.R.T enabled also ? it pays to .........check in bios

Nodrog
23-02-2004, 08:02 PM
Checked all the connections, both on the devices and the board, Asus A7V266. By psu do you mean power supply? If so it's a 300w. After turning off the system I notice the heatsink on cpu is hot to the touch. Can't put a figure on it though. Is there a utility for this? But the other thing I see is the fan on Via VT8366 is not going. Should replace it but can't see how it comes off, looks like a couple of spring loaded pegs.

drcspy
23-02-2004, 08:19 PM
if you have some fan that's not working you MUST replace it BEFORE you do anything else.............possibly you have already cooked your goose :(

Nodrog
23-02-2004, 09:12 PM
Pulled the sticker off and gave it a lube, just like my daddy showed me. Spinning really well now. Good old Asus, give your M'board a service and away ya go.
Hasn't fixed the dodgy combo drive though. Might pull it and take it back, see what the guys in the shop make of it.