PDA

View Full Version : DDR Memory and Hard Drive



Curly
08-08-2003, 03:03 PM
I have an ABIT KG7 motherboard coming to replace an existing faulty one.

The ABIT takes 184 pin DDR PC1600/PC2100 SDRAM.

I have plenty of what I will call ordinary SDRAM, what is the difference, can I use my existing SDRAM initially just to get things running or is it totally different. I seem to recall that the SDRAM was 168 pin and if that is correct then, well - I have answered my own question, damit :-)


With regards to the hard drive, is there anything I need to do to use my existing drive with the new motherboard?

System Win ME, 512 Mb SDRAM, 20 gig Maxtor 7200RPM and 1.2 gig Athlon

kiwibeat
08-08-2003, 03:24 PM
no unless the m/board has the option of using both DDr ram has totally different slots to sd133 or 100 ram

Elephant
08-08-2003, 03:46 PM
If the Motherboard ( New ) is different to the old motherboard then you will have to load the chipset drivers into your WinMe installation.

tweak\'e
08-08-2003, 05:35 PM
with the new motherboard you will need to remove the old motherboard drivers and install the new ones EVEN IF THE MOBO'S ARE SIMILEAR. there is also a possibility of needing a windows reinstall.