PDA

View Full Version : disk check fails



SarahKing
19-07-2002, 09:07 PM
I'm having some problems with a 4 year old win2k PC siezing and am doing some maintenance. It's been a lemon from day 1 but not quite bad enough to warrant throwing it out. The manufacturer took it in for tests when it was new and couldn't find any real problems.

For some time I've had Norton utilities running and on startup it tries to check the disks but can't because of a sharing error.

Finally tonight I have put the PC into safe mode and tried from there - similar error: "The disk check could not be performed because exclusive access to the drive could not be obtained". That's on the C: drive (only about 2 years old). D: is the original hard disk, is physically separate and has no problems.

I've loaded up a temperature monitor too, but don't know what is acceptable and what's too hot. Its sitting on about 40C which seems hot to me.

Does anyone have any ideas?

Sarah

Marty2001
19-07-2002, 09:23 PM
To run a scanner during system startup
Running a scanner during system startup is not the same as running it after system startup. During system startup, fewer files are open, so a scanner is more likely to be able to obtain exclusive access to the drive. Norton Disk Doctor for Windows NT/2000/XP does not have the capability of running during the bootup process, but CHKDSK does. If you receive the above message, you can run CHKDSK during the bootup process by answering Yes to the question "Would you like to schedule a repair to occur the next time you start the system?"

To set a scanner to run during startup the next time Windows NT/2000/XP starts, follow these steps:
1. Open Norton Disk Doctor.
2. Check Fix Errors.
3. Select the drive.
4. Deselect any other drives.
5. Click Diagnose.
6. Wait for the following prompt:

"NDD could not perform a diagnosis or repair because exclusive access to the drive could not be obtained. NDD can diagnose this drive if 'Fix Errors' is unchecked. Would you like to schedule a repair to occur the next time you restart the system?"

7. Click Yes. The next time the computer boots, a repair scanner will run during the bootup process.

http://service4.symantec.com/SUPPORT/nunt.nsf/8e4d888f4373bb0485256951004d887d/d4311edd8ab1ee3c8525645d00621d36?OpenDocument&prev=http://search.symantec.com/custom/us/techsupp/kb/query.html?*col=kb*st=1*nh=7*pcode=nu*qp=url:us-lu,url:/nunt.nsf/8e4d888f4373bb0485256951004d887d*qt=%2Bexclusive%2 0%2Baccess%20%2Berror*miniver=nu2001-nt*sone=nu2001-nt_tasks.html*stg=3*prod=Norton%20Utilities*ver=20 01%20for%20Windows%20NT/2000*svy=*taskquery=error*boolean=and<>&sone=nu2001-nt_tasks.html&stg=3&prod=Norton%20Utilities&ver=2001%20for%20Windows%20NT/2000&base=http://www.symantec.com/techsupp/nu/&next=nu2001-nt_contact_tscs_solve.html&src=sg&pcode=nu&svy=

Marty2001
19-07-2002, 09:25 PM
As the link is so long, here is the document ID at www.symantec.com
Product(s): Norton Utilities 2.0 - WinNT, Norton Utilities 2001 v5.0 - WinNT/2000, Norton Utilities 2002 v6.0 - WinNT/2000/XP
Operating System(s): Windows NT 4.0, Windows 2000, Windows XP
Document ID: 1997317125140
Date Created: 03/17/97
Last Modified: 06/28/2002

*Sparky*
20-07-2002, 03:46 AM
40C is only slightly warm. Not too hot.
It will warm up quite a bit when you play games and things.

SarahKing
20-07-2002, 01:54 PM
thanks for the info. I hadn't realised the fail message was so generalised. I will have to keep looking for other reasons for the PC to lock up now :)

and thanks Sparky for the temperature feedback.