PDA

View Full Version : Help with PSU



Driftwood
29-07-2012, 07:13 PM
I am looking for a power supply for a Biostar iDeq 120v.

Current dead one is:
Enhance Model: ENP-222E

mikebartnz
29-07-2012, 11:46 PM
I can only assume you are in the USA being 120v. You would be just as well off using Google as we are 240v.

pctek
30-07-2012, 07:45 AM
Corsair, Antec or Enermax.

Driftwood
30-07-2012, 08:33 AM
Current one is Enhance but any make that will fit & do the job.
This is deffinately for NZ use.

Driftwood
30-07-2012, 08:59 AM
This has a 20 pin motherboard conector.
The size is the problem 140mm x 82mm x 56mm.

dugimodo
30-07-2012, 10:14 AM
would a SFF PSU fit?
http://www.pp.co.nz/products.php?pp_id=AA24337 125mm x 100mm x 64mm

I used one of these in a mini itx build to run an i5 and a GTX 460, worked well.

inphinity
30-07-2012, 10:49 AM
a 120v power supply will just explode if you plug it in to standard NZ mains. How are you powering this?

Driftwood
30-07-2012, 10:54 AM
would a SFF PSU fit?
http://www.pp.co.nz/products.php?pp_id=AA24337 125mm x 100mm x 64mm

I used one of these in a mini itx build to run an i5 and a GTX 460, worked well.


Yes it would do the job, but I doubt the owner would like to spend that much on a 10 year old system

Driftwood
30-07-2012, 10:58 AM
a 120v power supply will just explode if you plug it in to standard NZ mains. How are you powering this?

That 120v is just a figure I got from google when I looked up Biostar iDeq.
I assumed it was just a model number.
The current PSU is a dual voltage one.

Driftwood
13-08-2012, 11:53 AM
Good result on this.
The owner found a complete unit at a re-cycle centre.
Just swaped over the PSU's.

gary67
13-08-2012, 02:55 PM
Good result on this.
The owner found a complete unit at a re-cycle centre.
Just swaped over the PSU's.

Yes they can be great places to find older parts, I used to get all sorts of bits from the Nelson recycle shop