PDA

View Full Version : 1x8GB stick or 2x 4GB?



PC builder
01-06-2012, 07:21 PM
Thinking of buying
Corsair Vengeance 8GB (2 x 4GB) DDR3 1600 (PC3 12800) CMZ8GX3M2A1600C9B
Or 1x Corsair Vengeance 8GB DDR3-1600 Memory

Is there any speed differences? 1x 8GB will open up more options in the future.

Also is a NRP-PC602 600w PSU enough to run a GTX 560ti? It was purchased overseas.

Thanks

Nick G
01-06-2012, 07:24 PM
No there shouldn't be any speed difference, both ram modules will run at the same clockspeed. Google your graphic card, it should say what the power requirement is.

icow
01-06-2012, 07:29 PM
2x4gb will be slightly faster. As they 2 sticks can run in dual channel mode. The disadvantage is that you are limiting the updatability of your computer in the future by filling the/an extra ram slot.

Speedy Gonzales
01-06-2012, 07:39 PM
Depends what the mobo supports. If it supports up to 32 GB / and its got 4 slots. You could get 1x 8 GB then get the rest later. But if it supports up to 16 GB, then it probably wont support 1x 8 GB stick in one slot. You would have to get either 2 GB sticks or 1 x4 GB in each slot. If you want to use 16 GB. And, you would have to install 64 bit

inphinity
01-06-2012, 11:11 PM
Some will argue better performance going paired 4GB, due to running dual-channel, but personally, aside from a very few very memory-intensive operations, there's no practical difference.

Agent_24
01-06-2012, 11:25 PM
Dual-channel is still faster. Why not?

Slankydudl
02-06-2012, 12:01 AM
Dual channel ftw... But for upgradability ur probably best with a single 8gb.