View Full Version : Celeron 500 on Digial pc3500

10-10-2001, 10:34 AM
I have decided to replace the Pentium II 266 in my Digital pc3500 with a Celeron 500, but it reports at startup as a Pentium Pro 366 and then locks up. If I disable the cache memory in the bios it will run, but very slowly. The motherboard documentation says it will accept up to a 533 chip and I have loaded the most recent bios from Digital. Any suggestions? Thanks. james

10-10-2001, 04:07 PM
First, does the manual say it supports Celerons.

Also check your jump settings, you may need to also set voltage, bus speed (66Mhz), multiplier (8x).