PDA

View Full Version : Aligning a Satellite dish



arjay
25-12-2010, 08:36 PM
I have to set up a satellite dish in Auckland to Optus D!.
The Elevation angle is stated to be 44.4 degrees. My own dish, which was set up by an expert, seems to be set at 18 degrees. Can anyone explain where this 44.4 degrees is measured to and from?
Any help gratefully received.

gary67
25-12-2010, 08:38 PM
Just look at other dishes nearby and see what they are set up as

arjay
25-12-2010, 08:59 PM
Just look at other dishes nearby and see what they are set up as

I've already looked at my own dish but I want to know the theory!

tweak'e
25-12-2010, 09:29 PM
where are you measuring the degrees from?
if its off the writing on the dish, it only meaning full IF the pole is perfectly straight.

Paul.Cov
25-12-2010, 09:38 PM
I could be wrong, but I think some dishes are asymmetric, so the receiving arm is not over what would appear to be the geometric centre of the dish, so measuring the angle between the receiver and the centre of the dish might not give the true inclination of the dish.

tweak'e
25-12-2010, 09:57 PM
most dishes used here are offset (asymmetric) so it never looks quite like the right angle.

feersumendjinn
25-12-2010, 11:26 PM
http://www.freeviewshop.co.nz/dish-angle-calculator-i-16.html
This help?
You'll need one of these too.
http://www.freeviewshop.co.nz/zenus-sf95-digital-satellite-finder-meter-p-621.html

arjay
26-12-2010, 08:49 AM
I could be wrong, but I think some dishes are asymmetric, so the receiving arm is not over what would appear to be the geometric centre of the dish, so measuring the angle between the receiver and the centre of the dish might not give the true inclination of the dish.

I think this is the answer. the angle that the LNB is offset from the centre of the disc is subtracted from the 'offset angle' given, (44.4degrees in Auckland) so the dish is leant back at about 22 degrees.
Thanks for that, Arjay