PDA

View Full Version : Two In One



21-09-2001, 06:35 PM
At the moment, I have a pentium 75Mhz cpu... but is it possible to put in another one to make it 150Mhz... if so how...

21-09-2001, 08:07 PM
Not unless it is a dual cpu motherboard which is highly unlikely.

21-09-2001, 09:08 PM
Just in case you ment removing the current CPU, rather than adding a second.

You will need to check if your motherboard supports a 150mhz processor. Assuming you can find one.

22-09-2001, 09:24 AM
If you don't have the manual for your motherboard, it will most likely be on the net somewhere. Think more pentium 133, 166 they are cheap and available even with motherboards for about $40.00 to 80.00. checkout trademe.co.nz or trade and exchange.

24-09-2001, 10:31 PM
Short answer is no
reason...2x75 will not give you 150 it will give you 2 75meg processors assuming you have a dual processor board you will need to run NT4 to use them as win9x does not support symetrical multi processing and win2k will not even look at anything under 166....

Orac