PDA

View Full Version : Intel D945GCCR MB



bk T
16-12-2010, 09:49 PM
This MB works fine other than no POST screen display when booting up. It goes screen doesn't show anything at all when the ON button is pressed; it pauses for about 3 seconds and then goes to the Windows start up screen. Checked the BIOS setup, couldn't find anything relates to this issue.

Is this the default Intel MB?

Speedy Gonzales
16-12-2010, 09:52 PM
Try pressing the Esc key after you reboot. See if it shows something

bk T
16-12-2010, 09:59 PM
No, doesn't work.

Speedy Gonzales
16-12-2010, 10:01 PM
Probably something that the Intel mobos dont show. Just as long as it boots into windows, I wouldnt worry about it

Agent_24
16-12-2010, 10:31 PM
I have an Intel board, which does the same thing.

Reason is that it doesn't give the monitor time to turn on before it's done with POST and starts OS boot.

Try pressing the Pause\Break button after swich on, then you might see something. If not, press enter and then pause again. do this a couple of times and you might get something on the screen.