PDA

View Full Version : New PC boot



bk T
03-12-2010, 03:11 PM
My newly built PC works fine other than the following:

Everytime when I press the ON button, the fans spins for a second and stops (like dead) for about 3 seconds, then it spins up again to the boot sequence and starts Windows 7 normally.

Should I be concerned about this 'abnormality'? Or, just live with it?

It's a Gigabyte MB model: GA-X58A-UDR3.

Speedy Gonzales
03-12-2010, 03:16 PM
Mine does the same thing. I wouldnt worry about it

pctek
03-12-2010, 05:57 PM
Er......it shouldn't.

feersumendjinn
03-12-2010, 06:05 PM
Go into the bios and disable cpu fan speed control (set it to run at full speed regardless of temperature, you'll probably find it annoying though :)).
Had a Gigabyte mobo which did exactly that, here yesterday.

Speedy Gonzales
03-12-2010, 06:34 PM
Fan control is off. Its been like that since I built it. It hasnt blown up yet

bk T
03-12-2010, 09:10 PM
Came across another similar board (same make and model) but it doesn't behave like this.

It must be something not quite right but other than that it is working just fine.

I've flashed the latest BIOS update but it doesn't correct the 'not-so-correct' behaviour.

Speedy, how long have you got this board?

Speedy Gonzales
03-12-2010, 09:23 PM
Since 18 November 2008. So 2 yrs 2 weeks 1 day, as of today

wainuitech
03-12-2010, 09:50 PM
While not the exact same problem, just lately, most of the new PC's Ive built with gigabyte boards do similar -- the fans run OK, but they start, almost appear to Hang with a blank screen for those 3 seconds (approx) Longer than Normal, compared to ASUS Boards, then run correctly, showing the contents of the BIOS (The BIOS Manufacturer and Version Number and other details).

bk T
03-12-2010, 10:07 PM
Looks like it's a common issue with Gigabyte boards.

Snorkbox
03-12-2010, 10:24 PM
I built one with a Gigabyte board about 3 months ago. Did the same thing. Still runs fine.

Speedy Gonzales
03-12-2010, 10:33 PM
This is an ASUS mobo tho. It stops for a few secs, to show the NIC info and whats on the IDE connection (when I turn it on).