PDA

View Full Version : Screen resolution wont do widescreen - driver issue?



roddy_boy
23-10-2010, 07:56 PM
Hi all,

Just jumped on my flatmate's pc and its resolution is all wrong. When trying to adjust the resolution the moniter wants the resolution to be 1920 * 1080 but there is no option for this res (only 1920 * 1440). I went into the device manager and the display adapter adapter drivers aren't installed. Trying to install prompts for a cd which he doesn't have. Is there any way to find the correct drivers? Preferrably without having to open the pc case.

Thanks,

Roddy

Speedy Gonzales
23-10-2010, 07:59 PM
Might help if you tell us what the system / vidcard is. Use Everest or something like PC wizard, to see whats in the case

roddy_boy
23-10-2010, 08:08 PM
Uh yup roger that. The graphics card died and he took it out and is using the motherboard integrated graphics. Info from PC wizard:


Mainboard : Unspecified P4VM800
Chipset : VIA PM880
Processor : Intel Pentium 4 @ 3000MHz
Physical Memory : 1024MB (2 x 512 DDR-SDRAM )
Video Card : VT82C570 MV IDE Controller VIA/S3 Unichrome Pro VGA Adapter
Hard Disk : Seagate ST380013 AS SCSI Disk Device (80GB)
DVD-Rom Drive : Toshiba-Samsung CD/DVDW TS-H552U
Network Card : VIA Technologies VT6102 Rhine II Fast Ethernet Adapter
Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 3 (32-bit)
DirectX : Version 9.0c (February 2006)


Thanks Speedy.

feersumendjinn
23-10-2010, 08:08 PM
Is it a brand name comp?
Is it integrated graphics or a separate video card?
If integrated, are the motherboard drivers installed?
In either case, you need to download the driver/s from the manufacturer/s website if you don't have the disks.
Need more details.

Speedy Gonzales
23-10-2010, 08:16 PM
Might be an Asrock

http://www.asrock.com/mb/overview.asp?Model=P4VM800

And the drivers

http://www.asrock.com/mb/download.asp?Model=P4VM800&o=All

Hmm somehow I dont think that vidcard will handle / do HD. So, you need the 4-1 drivers, LAN, Audio and VGA. Forget the others, unless you use the AMR port, or RAID / the hdd in SATA

wainuitech
23-10-2010, 08:19 PM
As speedy said, the boards 99% sure its an Asrock. Thats about the only make with that model number.

roddy_boy
23-10-2010, 08:59 PM
Cheers for the help guys. I managed to install the 4 in 1 driver but when I try to install the VGA driver it spits the following error:

---------------------------
S3GSetup
---------------------------

Setup was unable to complete the installation. Check the progress log in your Windows directory for more details.
---------------------------
OK
---------------------------

I don't know where to find the progress log.


So I tried to do it from device manager, pointing the installer to the directory I just downloaded, it asks for vtmini.sys so I direct it there, it tells me it hasn't passed Windows Logo testing so I click Continue Anyway. It asks for vtmini.sys so I point it again, then it tells me all these files already exist and are newer, I click replace anyway, then it spits an error saying it can't copy VTCfg3d.dll and that file isn't in the driver I just downloaded.

Any ideas?

Edit: If I just click cancel it gives me the option to continue install without the file, there's a bunch more files that it can't find, should I just go ahead without copying these files? I just don't want to break this computer...

Cheers.

Speedy Gonzales
23-10-2010, 09:08 PM
Look in C:\windows\ for s3iscfg.log. If its there, copy & paste it here

roddy_boy
23-10-2010, 09:10 PM
************ S3ISET32 LOG - Started Sat Oct 23 20:43:44 2010 ************
S3Iset32 v2.00.07-0709 (IShield 7.7.0.262), 2.00.10-0917 Bootleg on Win XP SP1
Internal signature: 6-5432
Caller cmdline: ''
SupportDir: 'C:\DOCUME~1\Sam\LOCALS~1\Temp\{2B43252C-A1E3-4C47-927C-9F2C276D3515}\'
Mode: Unattended, Normal
AllowReboot: TRUE
SilentReboot: TRUE
PromptReboot: TRUE
PromptSilentReboot: FALSE
RemoveWindowsINF: FALSE
PreInstallFiles: FALSE
DisableMenuAnim: FALSE
DisableMenuShadow: FALSE
Find VendorID: 1106
Driver INF at: C:\Documents and Settings\Sam\Desktop\VGA_XP_2K_P4M800(16.94.44.09) \VGA_XP_2K_P4M800(16.94.44.09)\hg202i.inf
Find hardware code->0
Custom uninstall info: C:\WINDOWS\UChromeP.uns
Uninst DLL: C:\PROGRA~1\VIA\UChromeP\s3iset32.dll
Uninst Log: C:\PROGRA~1\VIA\UChromeP\UChromeP.uns
Reg uninst key: C:\PROGRA~1\VIA\UChromeP\s3minset.exe /u C:\PROGRA~1\VIA\UChromeP\UChromeP.uns
Add. dir to remove: C:\Program Files\InstallShield Installation Information\{2B43252C-A1E3-4C47-927C-9F2C276D3515}
Installing VIA/S3G UniChrome Family Win2K/XP Display...
Hardware found - ven:1106 dev:3118 ssven:1849 ssdev:3118 rev:02 bus:01 devnum:00 func:00 (InVga=1)

**** Begin Win2K/XP Driver Install ****
Enum devs for GUID {4d36e968-e325-11ce-bfc1-08002be10318} to match ''...
#0, Inst=00001CF0 ID=PCI\VEN_10DE&DEV_00F1&SUBSYS_11911554&REV_A2\4&354AEA31&0&0008
#1, Inst=000022F4 ID=PCI\VEN_1106&DEV_3118&SUBSYS_31181849&REV_02\4&354AEA31&0&0008
Found match!
Found InstID=PCI\VEN_1106&DEV_3118&SUBSYS_31181849&REV_02\4&354AEA31&0&0008.
Found Mfg line: 'VIA.Mfg'.
Ln 0: 'viagfx_3205,PCI\VEN_1106&DEV_7205'
Ln 1: 'viagfx_3314,PCI\VEN_1106&DEV_3344'
** INF does not describe detected hardware.
DestroyTimer returned an error!
slInstall returned error. Cannot continue.
-> Setup was unable to complete the installation. Check the progress log in your Windows directory for more details.
!! Setup was aborted !!
Cleaning up: C:\Program Files\VIA\UChromeP doesn't exist!
******** End of progress log ********

Speedy Gonzales
23-10-2010, 09:25 PM
Looks like the inf file, in that install doesnt match the videocard

Try these

http://www.viaarena.com/Driver/P4M800Pro-P4M800CE_220001u_XP_wIShld_logod.zip. Use ccleaner and remove all the temp files etc first. Did you reboot after installing the 4-1 drivers?

roddy_boy
23-10-2010, 09:38 PM
Same thing....

********** S3 GRAPHICS SETUP LOG - Started 2010/10/23 21:37:25 PM **********

***** Please scroll to the end of *****
***** this document for the results. *****

S3Iset32 v2.00.64-0730, (S3GSetup/IS10 2.00.64-0730)
System: Win XP SP2 Build 2600 (Service Pack 3)
Signature: 18-9968 (ANSI)
Caller cmdline: ''
SupportDir: 'C:\DOCUME~1\Sam\LOCALS~1\Temp\S3M8BF.tmp\'
Called by custom setup app.
AllowReboot: TRUE
Prompt: TRUE
SilentReboot: TRUE
Prompt: FALSE
RemoveWinINF: FALSE
PreInstFiles: FALSE
No UI Reboot: FALSE
MenuAnimOff: FALSE
MenuShadowOff: FALSE
Find VendorID: 5333
Driver INF at: C:\Documents and Settings\Sam\Desktop\P4M800Pro-P4M800CE_220001u_XP_wIShld_logod\wIShld\uc05i.inf
Find hardware code: 0
Custom uninstall info: C:\WINDOWS\UChromeP.uns
HW found 0 - Ven:1106 Dev:3118 Ssven:1849 Ssdev:3118 Rev:02 at bus 1 dev 0 func 0 (InVga=1)

************** Begin Win2K/XP Driver Install **************
Enum GUID {4d36e968-e325-11ce-bfc1-08002be10318} devs to match 'PCI\VEN_1106&DEV_3118&SUBSYS_31181849&REV_02':
#0 Inst=00001330 'PCI\VEN_1106&DEV_3118&SUBSYS_31181849&REV_02\4&354AEA31&0&0008'
Reg Location: PCI bus 1, device 0, function 0
Match reg key (by PCI)!
->Found Inst=PCI\VEN_1106&DEV_3118&SUBSYS_31181849&REV_02\4&354AEA31&0&0008
Parse INF file...
Found Mfg line in INF: 'VIA.Mfg'.
Ln 0: 'viagfx_3314,PCI\VEN_1106&DEV_3344'


#################################################
!! INF does not describe detected hardware!!
Device or vendor ID (or subsystem) mismatch!!
#################################################

StopTimer OK, but no timer action occurred.
Trying to copy relevant part of Setupapi.log
No change detected, nothing to copy.
-> Setup was unable to complete the installation.

-> Setup was unable to complete the installation. Check the progress log in your Windows directory for more details. (-5)->C:\WINDOWS\s3iscfg.log
** Installation Failed **
!! Setup was aborted !!
******** End of progress log ********

Trev
23-10-2010, 09:40 PM
To run the monitor at 1920x1080 you will have to put in a proper graphics card. An integrated graphics card won't do it. You are wasting your time doing what is all mentioned above.
:)

Speedy Gonzales
23-10-2010, 09:40 PM
Ok well if its on the net do you want me to check it out with teamviewer?? Might be easier trying to find the right video driver

Install the updated chipset drivers then reboot then try the last download again

http://www.viaarena.com/Driver/VIA_HyperionPro_V524A.zip

Agent_24
24-10-2010, 11:00 AM
You need these: http://www.viaarena.com/Driver/unichrome_pro_wxp_logo_169452-04.zip

Speedy Gonzales
24-10-2010, 11:48 AM
Hopefully those work, because nothing else did. The via site isnt the easiest site to find drivers

pctek
24-10-2010, 12:57 PM
Video Card : VT82C570 MV IDE Controller VIA/S3 Unichrome Pro VGA Adapter


This is not a video card. Its an integrated chipset, Not very good either.

get a real card - low end is fine if you aren't gaming.

Trev
24-10-2010, 04:13 PM
Yes that is what I have been trying to till them.
:)

roddy_boy
24-10-2010, 07:18 PM
You need these: http://www.viaarena.com/Driver/unichrome_pro_wxp_logo_169452-04.zip

Cheers bro this was the right one. Thanks heaps, and thanks Speedy too for all the help.