PDA

View Full Version : Replace graphics card fan?



FoxyMX
08-04-2010, 02:13 PM
A few days ago when starting up my PC began making some rather horrible noises which then settled down after about half an hour or so. I've tracked the racket down to the graphics card fan which I can see isn't running properly. It seems to sort of stop and start a bit and when I put my finger on it the noise stopped.

Is this something that I can fix with a drop of oil or a new fan or am I up for a new graphics card?

It's a Leadtek GEForce PX6600GT PCIe card.

wratterus
08-04-2010, 02:24 PM
Your card looks like this one?

Often a bit of WD-40 or similar helps them, but once fans start doing this it's only a matter of time until they give up all together and the graphics card cooks itself.

If you could find a faulty card on trademe you might be able to switch the heatsinks, but a working 6600 is under $50 off trademe now so it's hardly worth the effort. If you were looking at a new card this would be a good opportunity to upgrade. ;)

FoxyMX
08-04-2010, 02:34 PM
Yep, that's the one. Not really keen on replacing the card if I can just replace the fan. Hopefully it is just a matter of finding a fan that will fit.

bob_doe_nz
08-04-2010, 03:06 PM
Just buy a new fan + some thermal paste.

Something like that is a 10-20 min job.

qazwsxokmijn
08-04-2010, 03:08 PM
Velcro tape, and a spare 80mm fan is all you need.

FoxyMX
08-04-2010, 04:53 PM
OK, so I took the card down to the local PC shop to see if they had a fan that size and was told that I would have to replace the entire card as you can't get fans like that. :(

Are they telling porkies?

wratterus
08-04-2010, 04:54 PM
Nah you can't really source graphics card fans, pretty much every single one is different.

So either new card, or rangi something up like qaz suggested.

Speedy Gonzales
08-04-2010, 05:08 PM
What about this ? (http://www.modster-pc.co.nz/shop/product_info.php?cPath=91&products_id=3322)

nedkelly
08-04-2010, 05:09 PM
my mate bought a big passive cooler when his fan failed. Cools his gpu better than the fan did.

Agent_24
08-04-2010, 08:31 PM
Any of these would probably work:

http://pricespy.co.nz/product.php?p=372133
http://pricespy.co.nz/product.php?p=402259
http://pricespy.co.nz/product.php?p=237776
http://pricespy.co.nz/product.php?p=372137

(more: http://pricespy.co.nz/category.php?b=585&o=produkt_pris_inkmoms)

Just make sure you look up the specification on the manufacturer's website and make sure it will fit and it has enough cooling.

Failing that, eBay is good, in fact you could probably buy an exact same fan from someone in China and just replace that, without having to buy a whole new heatsink.

hueybot3000
08-04-2010, 08:59 PM
Find a big old heatsink and stick it on. I did recently with a 8500gt and had games running on it with temps looking fine.

I think I used a p2 heatsink lol

FoxyMX
09-04-2010, 06:10 PM
Cheers all. :)

Since having the thing out and fiddling around with it yesterday I haven't heard any horrid noises from it today. That makes me worried though, as it might not be spinning now so I'll have to get the cover off again to have a look.



What about this ? (http://www.modster-pc.co.nz/shop/product_info.php?cPath=91&products_id=3322)

That looks the bees knees. I've emailed them and he's going to check for me whether it will fit. Fingers crossed. :cool:

Agent_24
09-04-2010, 07:00 PM
If it's not spinning you'll find out when the screen goes blank and there's a funny smell...

FoxyMX
10-04-2010, 01:21 PM
If it's not spinning you'll find out when the screen goes blank and there's a funny smell...

No blank screen or smoke appearing... yet. So far so good. :cool:

Just in case I have to eat my words, probably in five minutes time, I'm thinking I ought to decide on a replacement card to be on the safe side. New thread coming up! :p