View Full Version : Case feet?

03-01-2010, 10:36 PM
Hi im trying to find sum feet for my case.

At the moment its got little media style case feet on it.

I dont want anything with LED/lights in them but thats all I can see on Trademe. I have had a little look on net and can only find case feet like the ones i already have. ie jaycar has them.

This is the trademe feet.

This is the feet on my case at moment. They are 10mm high and 35mm round.

Anyone no of any places that have feet?


03-01-2010, 10:47 PM
Enquire here:-


04-01-2010, 10:28 AM
Only case feet on there is the 4 x Rubber Case Feet in the Noise Reduction Kit (Black)
and (Blue) kits. Going to email them today.

04-01-2010, 10:52 AM
You could try a HiFi shop and get some speaker feet (spikes)

04-01-2010, 04:51 PM
Illuminated case feet !! ???


I just get some self adhesive pads from Bunnings.

Illuminated case feet! The world has gone nuts!

04-01-2010, 04:56 PM
Madness, madness!

04-01-2010, 05:17 PM
Only case feet on there is the 4 x Rubber Case Feet in the Noise Reduction Kit (Black)
and (Blue) kits. Going to email them today.

Agreed but the only other feet I could find for a case that you have spent some time building.

04-01-2010, 10:17 PM
Hi. thanks all after spending a bid of time last night and this moring looking on net for feet Im making my own.

Out of Alloy and black acrylic. Also going to get sum rubbers for the bottoms.

This it how it will be. (Foot totals 14mm high and 50mm round)

1st: case
2nd: Washer
3rd: Alloy disc
4th: Black acrylic disc
5th: Alloy disc
6th: Rubber/form pad
7th: Desk/table

04-01-2010, 10:19 PM
Good stuff

04-01-2010, 10:20 PM
I have to say that Plod came up with a good idea.

04-01-2010, 11:19 PM
Ok got sum photos. They are not finished yet still need to polist them lots more.

All 4 feet cut and read to be cleaned and polished.

1 of the feet polished a little. Still want to polist them more. Got to get sum better polish compand as I was using sum kitchen silver poilsh.

The feet are 50mm round and 10mm thick. Got a stainless steel washer to go on the tops of all 4 of them thats 25mm round and 2mm thick. Still have to get the bolts and nuts and rubber to go on the bottoms.

04-01-2010, 11:37 PM
Also forgot to say. All made from 100% recycled PC parts. Alloy is from the case im modding and the acrylic was offcuts from a case mod from a mate.

Project log is here for the cutom case im building.