PDA

View Full Version : Tomato Firmware. Blocking Port Issues.



bob_doe_nz
17-11-2009, 08:22 PM
Got an Asus WL-520GU Router running on Tomato Firmware, half bridged to a Dynalink RTA1320.

Currently I'm trying to block all but the basic ports on the router to various IP's / MAC Addresses.

I've got the following ports allowed: 21,22,25,53,80,110,443,1863,5050,5222

But when I try it on a test machine, I just get timeouts on all web browsing and chat software.

Below is what I've blocked, set up as a single Access Restriction List. Once I disable it, internet usage is all hunky dory


TCP/UDP, port 1-20
TCP/UDP, port 26-52
TCP/UDP, port 54-79
TCP/UDP, port 81-109
TCP/UDP, port 111-442
TCP/UDP, port 444-1000
TCP/UDP, port 1001-1500
TCP/UDP, port 1501-1862
TCP/UDP, port 1864-5049
TCP/UDP, port 5051-5221
TCP/UDP, port 5223-65535

Chilling_Silence
17-11-2009, 08:36 PM
In Access Restriction you want:
Enabled
All Day
Every Day
Normal Access Restriction
Applies to All Except
Enter the MAC / IP of those that you do *not* want affected
Untick Block All Internet access
Specify the ports you want blocked as "Src or Dst"

bob_doe_nz
17-11-2009, 09:01 PM
The only difference is that mine is applied to only two addresses instead of
Enter the MAC / IP of those that you do *not* want affected

I changed it to your settings and still get the same issues. I've included a screenie (http://www.imagef1.net.nz/files/porty_basic.JPG)

bob_doe_nz
18-11-2009, 01:34 PM
Bump? Any ideas?