PDA

View Full Version : FTP help



kandjc
04-08-2009, 09:40 AM
I recently set up a web page at ihug using using Filezilla. Set up went ok and I managed to transfer my first page. Yesterday and today I tried to access the page with Filezilla to add more information and I get this:

Status: Resolving address of homepages.ihug.co.nz
Status: Connecting to 203.109.135.90:21...
Status: Connection established, waiting for welcome message...
Error: Could not connect to server
Status: Waiting to retry...

What could be the problem - I have not altered anything in the Filezilla configuration.
Many thanks.

Blam
04-08-2009, 10:26 AM
Done this yet?
http://wiki.filezilla-project.org/Network_Configuration#Setting_up_FileZilla_Server_ with_Windows_Firewall

Blam

kandjc
04-08-2009, 04:36 PM
Blam, looked at that help page and done the firewall exception but when I run the Filezilla
Configuration test I get this:

Response: 200 Using port 1311, data token 1828079175
PORT 118,92,230,180,5,31
Response: 502 Port mismatch. Tainted by router or firewall.
PORT command tainted by router or firewall.
Connection closed

What does that mean?
What I don't get is that I had no problem connecting when setting up the web page.
Many thanks.

Blam
04-08-2009, 04:42 PM
Have you forwarded the correct ports on your router?

kandjc
04-08-2009, 05:03 PM
Blam, I have a USRobotics 9108 adsl router and under Security Tab there is Port Triggering and boxes for: Trigger Port Start, Trigger Port End. Open Port Start, Open Port End. I presume this is what you are talking about. In Filezilla configuration there is Lowest Available Port = 6000, Highest Avaialble Port = 7000. What do I do with these?
Many thanks.

wainuitech
04-08-2009, 05:20 PM
You usually need to open port 21 in the router for FTP transfers.

Edited: have a read of the manual (http://www.usr.com/support/9108/9108-ug/appendix.htm) on how to open Port 21

Blam
04-08-2009, 08:03 PM
WT is dead right. If filezilla is left with default settings then 21 is the port to forward

Just follow the manual, then test if the port is open with this:

http://www.canyouseeme.org/

Cheers
Blam

kandjc
04-08-2009, 10:08 PM
The router is not exactly the same as the manual but I can get to "Add Virtual Server" and it asks:
"Select the service name and enter the server IP address and press Apply to forward IP packets for this service to the specified server"

Where do I find the server IP address?

Many thanks.

Blam
04-08-2009, 10:35 PM
Server IP means the IP of the computer you jneed to forward the port to.

If you do not have a static IP set up or Static DHCP set up then the internal IP may change everytime you boot your computer.

TO find out the IP of the computer go run>ipconfig

Blam

kandjc
05-08-2009, 11:41 AM
Blam, in router setup/Add Virtual Server when I add FTP server I get the following warning:
"Since port 21 is used, the router FTP server port will be moved to 2121"

Then when I run CanYouSeeMe.org I get this message:
Error: I could not see your service on "my ip number" on port (2121)
Reason: Connection timed out.

Many thanks.

wainuitech
05-08-2009, 11:47 AM
That will mean somewhere in the settings the router is already forwarding.

Can you post up a screen shot of the settings where you are trying to enter the port 21 - you may simply need to redirect it to the correct IP address of your PC.

Are you running a static IP on your PC ?

kandjc
05-08-2009, 12:38 PM
Hold your horses!!!!! Got it. Many thanks to you guys for the help - much appreciated.

wainuitech
05-08-2009, 02:34 PM
Cool - glad its working :thumbs:

rfxcasey
11-09-2009, 11:17 PM
Wow, what a fantastically useless thread this turned out to be when the guy doesn't even say what he did to get it working.:mad:

Jen
11-09-2009, 11:25 PM
Wow, what a fantastically useless thread this turned out to be when the guy doesn't even say what he did to get it working.:mad:Why not create a new thread asking for help instead of complaining in this one then?