PDA

View Full Version : system is crashing - don't know why



NZHawk
10-07-2012, 10:01 AM
I have a new install of Windows Vista Home Premium
and the system keeps crashing.
I have tested the ram & hard drive: both passed
the events viewer shows:

Log Name: System
Source: Service Control Manager
Date: 10/07/2012 9:40:44 a.m.
Event ID: 7026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Christine-PC
Description:
The following boot-start or system-start driver(s) failed to load:
AFD
DfsC
MpFilter
NetBIOS
netbt
nsiproxy
PSched
RasAcd
rdbss
Smb
spldr
tdx
Wanarpv6


Log Name: System
Source: EventLog
Date: 10/07/2012 9:49:09 a.m.
Event ID: 6008
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Christine-PC
Description:
The previous system shutdown at 9:45:22 a.m. on 10/07/2012 was unexpected.


Log Name: System
Source: Microsoft-Windows-DistributedCOM
Date: 10/07/2012 9:49:17 a.m.
Event ID: 10005
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Christine-PC
Description:
DCOM got error "1084" attempting to start the service ShellHWDetection with arguments "" in order to run the server:
{DD522ACC-F821-461A-A407-50B198B896DC}

Nhashon
10-07-2012, 10:46 AM
Did you load it from DVD (Windows 7) or USB or what ???????

NZHawk
10-07-2012, 10:47 AM
used a DVD
Windows Vista Home Premium

Nhashon
10-07-2012, 10:50 AM
Try this - Hope it helps -

Step 1:
Since you are able to boot into safe mode. I would suggest you to do a clean boot from safe mode.
Clean Boot will help you start your computer by using a minimal set of drivers and startup programs so that you can determine whether a background program or any of the third party service is interfering with your program.
To perform clean boot in, please follow the steps below.
1. Click Start on your Desktop
2. Type msconfig in the Start Search box and then press ENTER.
If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
3. On the General tab, click Selective Startup.
4. Under Selective Startup, click to clear the Load Startup Items check box.
5. Click the Services tab, click to select the Hide All Microsoft Services check box, and then click Disable All.
6. Click OK.
7. When you are prompted, click Restart.
To return your computer back to normal boot:
1. Click Start on your Desktop
2. Type msconfig in the Start Search box and then press ENTER.
If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
3. Click the General tab.
4. Click Normal Startup - load all device drivers and services, and then click OK.
5. When you are prompted, click Restart to restart the computer.
For information on using “Clean Boot”, see the following Microsoft Article:
http://support.microsoft.com/kb/331796
Step 2:
Once you finish with the clean boot from safe mode, you can try to boot in normal mode. If that doesn’t help then you can do a system restore.
To perform system restore please refer to the below link:
http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions
Step 3:
You can also run a virus scan as well on your computer to check if your computer is infected. Please follow the below links:
http://onecare.live.com/site/en-us/default.htm
How to get rid of malware.
http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/ba80504b-61f1-4d71-960f-b561798b7b42

- MAKE SURE U DO A VIRUS SCAN AT END

NZHawk
10-07-2012, 10:55 AM
thank you - will give it a run & report back

Speedy Gonzales
10-07-2012, 11:09 AM
And disable auto restart

NZHawk
10-07-2012, 12:30 PM
ok
have completed step 1, 2 & 3
and have also disabled auto restart
scanned with malwarebytes - no infections detected

what next?

Speedy Gonzales
10-07-2012, 12:34 PM
Wait for it to crash again tell us what it says, what the stop error is and what file is causing it. If it shows a file/driver

wainuitech
10-07-2012, 12:37 PM
The following boot-start or system-start driver(s) failed to load:
AFD
DfsC
MpFilter
NetBIOS
netbt
nsiproxy
PSched
RasAcd
rdbss
Smb
spldr
tdx
Wanarpv6
Last time I had that with Vista it was caused by a bad install. On the second install it had similar problems, Third time used a different DVD and it went in perfectly.:2cents:

Edited: try running the following "fixit" from microsoft http://blogs.technet.com/b/fixit4me/archive/2011/04/26/event-id-7000-or-7026-is-logged-in-the-system-log-on-a-computer-that-is-running-windows-7-windows-vista-windows-server-2008-r2-or-windows-server-2008.aspx Click where it says KB Article to get the actual fixit, then again could just be a corrupted install as I had

NZHawk
10-07-2012, 12:46 PM
thanks
on to it after lunch

Tplw9
10-07-2012, 03:07 PM
Vista is a pain in the arse anyway you should upgrade to Win 7

NZHawk
10-07-2012, 04:32 PM
It blue screened when I was going to try the FixIt.
I haven't been able to get it to reboot since.
The fact that it wont boot seems to indicate to me that it's hardware.
Could someone confirm my deduction.

Iantech
10-07-2012, 04:40 PM
How far is it getting? Not even to BIOS screen, past POST screen, Starting Windows ???

NZHawk
10-07-2012, 04:47 PM
nothing
no bios screen; opps just had it sitting unplugged
replugged it back in & it's started???
started in safe mode - tried to get a reading on the BSOD but froze
will try again
there was some beeping when I force shut down - short then long

NZHawk
10-07-2012, 04:56 PM
Here is the 1st BSOD:
==================================================
Dump File : Mini062712-01.dmp
Crash Time : 27/06/2012 12:15:58 p.m.
Bug Check String : UNEXPECTED_KERNEL_MODE_TRAP
Bug Check Code : 0x0000007f
Parameter 1 : 0x00000000
Parameter 2 : 0x00000000
Parameter 3 : 0x00000000
Parameter 4 : 0x00000000
Caused By Driver : tcpip.sys
Caused By Address : tcpip.sys+5ff4d
File Description : TCP/IP Driver
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.0.6002.22828 (vistasp2_ldr.120329-0337)
Processor : 32-bit
Crash Address : ntkrnlpa.exe+d865a
Stack Address 1 : ntkrnlpa.exe+1bd197
Stack Address 2 : ntkrnlpa.exe+8d7c8
Stack Address 3 : tcpip.sys+5ff4d
Computer Name :
Full Path : C:\Windows\Minidump\Mini062712-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 6000
Dump File Size : 137,328
==================================================

and the 2nd:
==================================================
Dump File : Mini071012-01.dmp
Crash Time : 10/07/2012 4:49:54 p.m.
Bug Check String : MEMORY_MANAGEMENT
Bug Check Code : 0x0000001a
Parameter 1 : 0x00041284
Parameter 2 : 0x04567001
Parameter 3 : 0x000024d8
Parameter 4 : 0xc0802000
Caused By Driver :
Caused By Address :
File Description :
Product Name :
Company :
File Version :
Processor : 32-bit
Crash Address :
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\Mini071012-01.dmp
Processors Count : 2
Major Version : 15
Minor Version : 6002
Dump File Size : 131,072
==================================================

hope this helps.

NZHawk
10-07-2012, 04:57 PM
It seems that unplugging the power from the computer clears some confusion allowing the computer to boot.?

Speedy Gonzales
10-07-2012, 05:03 PM
Looks like tcpip.sys is causing one of the crashes. Make sure the ram is in properly. Try putting the ram in another slot / or slots. See if it makes a diff with the 2nd stop error

NZHawk
10-07-2012, 05:09 PM
I have reseated the ram. - anything else?

I will run a ram diagnostics over night

Speedy Gonzales
10-07-2012, 05:13 PM
Well if the install was corrupt, try doing a repair. See if it crashes again since you've reseated the ram

wainuitech
10-07-2012, 05:53 PM
The first Error 7f Have a read --- http://support.microsoft.com/kb/137539